s/_timestep_accl/_timestep_bootup/

ampel-firmware/co2_sensor.cpp

@@ -3,7 +3,7 @@
 namespace config {
   // Values should be defined in config.h
   uint16_t measurement_timestep = MEASUREMENT_TIMESTEP; // [s] Value between 2 and 1800 (range for SCD30 sensor)
-  const uint16_t measurement_timestep_accl = 2; // [s] Measurement timestep during acclimatization
+  const uint16_t measurement_timestep_bootup = 2; // [s] Measurement timestep during acclimatization
   const uint16_t altitude_above_sea_level = ALTITUDE_ABOVE_SEA_LEVEL; // [m]
   uint16_t co2_calibration_level = ATMOSPHERIC_CO2_CONCENTRATION; // [ppm]
   int8_t max_deviation_during_calibration = 30; // [ppm]
@@ -103,9 +103,9 @@ namespace sensor {
     //NOTE: The timer seems to be inaccurate, though, possibly depending on voltage. Should it be offset?
     Serial.println();
     Serial.print(F("Setting SCD30 timestep to "));
-    Serial.print(config::measurement_timestep_accl);
+    Serial.print(config::measurement_timestep_bootup);
     Serial.println(" s during acclimatization.");
-    scd30.setMeasurementInterval(config::measurement_timestep_accl); // [s]
+    scd30.setMeasurementInterval(config::measurement_timestep_bootup); // [s]
 
     sensor_console::defineIntCommand("co2", setCO2forDebugging, F(" 1500 (Sets co2 level, for debugging purposes)"));
     sensor_console::defineIntCommand("timer", setTimer, F(" 30 (Sets measurement interval, in s)"));