# define AMPEL_WIFI // WiFi, and all other dependent services (MQTT, HTTP, NTP, ...)
# define AMPEL_HTTP // Should HTTP web server be started?
# define AMPEL_MQTT // Should data be sent over MQTT?
# define AMPEL_LORAWAN // Should data be sent over LoRaWAN? (Requires ESP32 + LoRa modem)
# define AMPEL_CSV // Should data be logged as CSV, on the ESP flash memory?
// # define AMPEL_LORAWAN // Should data be sent over LoRaWAN? (Requires ESP32 + LoRa modem)
/**
* WIFI
...
...
@@ -115,15 +115,20 @@
* LoRaWAN
*/
// Region and transceiver type should be specified in:
// 1) Requires "MCCI LoRaWAN LMIC library", which will be automatically used with PlatformIO but should be added in "Arduino IDE".
// 2) Region and transceiver type should be specified in:
// * Arduino/libraries/MCCI_LoRaWAN_LMIC_library/project_config/lmic_project_config.h for Arduino IDE
// * platformio.ini for PlatformIO
// See https://github.com/mcci-catena/arduino-lmic#configuration for more information
// It has been tested with "TTGO ESP32 SX1276 LoRa 868" and will only work with an ESP32 + LoRa modem
// In order to use LoRaWAN, a gateway should be close to the co2ampel, and an account, an application and a device should be registered,
// e.g. on https://www.thethingsnetwork.org/docs/applications/
// See https://github.com/mcci-catena/arduino-lmic#configuration for more information
// 3) It has been tested with "TTGO ESP32 SX1276 LoRa 868" and will only work with an ESP32 + LoRa modem
// 4) In order to use LoRaWAN, a gateway should be close to the co2ampel, and an account, an application and a device should be registered,
// e.g. on https://www.thethingsnetwork.org/docs/applications/
// 5) The corresponding keys should be defined in LORAWAN_DEVICE_EUI, LORAWAN_APPLICATION_EUI and LORAWAN_APPLICATION_KEY
// How often should measurements be sent over LoRaWAN?
# define LORAWAN_SENDING_INTERVAL 300 // [s] This value should not be too low. See https://www.thethingsnetwork.org/docs/lorawan/duty-cycle.html#maximum-duty-cycle
// WARNING: If AMPEL_LORAWAN is enabled, you need to modify the 3 following constants!
// This EUI must be in little-endian format, so least-significant-byte first.
// When copying an EUI from ttnctl output, this means to reverse the bytes.
