Commit 02e6f0b0 authored by Eric Duminil's avatar Eric Duminil
Browse files

Updated README

parent 8b16d137
Pipeline #5869 passed with stage
in 2 minutes and 37 seconds
...@@ -99,11 +99,12 @@ make upload board=esp32 && make monitor # For ESP32 ...@@ -99,11 +99,12 @@ make upload board=esp32 && make monitor # For ESP32
In Arduino IDE *Serial Monitor* or PlatformIO *Monitor*, type `help` + <kbd>Enter</kbd> in order to list the available commands: In Arduino IDE *Serial Monitor* or PlatformIO *Monitor*, type `help` + <kbd>Enter</kbd> in order to list the available commands:
* `ap!` (Forces access point mode).
* `auto_calibrate 0/1` (Disables/enables autocalibration). * `auto_calibrate 0/1` (Disables/enables autocalibration).
* `calibrate` (Starts calibration process).
* `calibrate 600` (Starts calibration process, to given ppm). * `calibrate 600` (Starts calibration process, to given ppm).
* `calibrate` (Starts calibration process).
* `calibrate! 600` (Calibrates right now, to given ppm). * `calibrate! 600` (Calibrates right now, to given ppm).
* `co2 1500` (Sets CO<sub>2</sub> level, for debugging purposes). * `co2 1500` (Sets CO<sub>2</sub> level, for debugging).
* `color 0xFF0015` (Shows color, specified as RGB, for debugging). * `color 0xFF0015` (Shows color, specified as RGB, for debugging).
* `csv 60` (Sets CSV writing interval, in s). * `csv 60` (Sets CSV writing interval, in s).
* `format_filesystem` (Deletes the whole filesystem). * `format_filesystem` (Deletes the whole filesystem).
...@@ -112,12 +113,17 @@ In Arduino IDE *Serial Monitor* or PlatformIO *Monitor*, type `help` + <kbd>Ente ...@@ -112,12 +113,17 @@ In Arduino IDE *Serial Monitor* or PlatformIO *Monitor*, type `help` + <kbd>Ente
* `local_ip` (Displays local IP and current SSID). * `local_ip` (Displays local IP and current SSID).
* `lora 300` (Sets LoRaWAN sending interval, in s). * `lora 300` (Sets LoRaWAN sending interval, in s).
* `mqtt 60` (Sets MQTT sending interval, in s). * `mqtt 60` (Sets MQTT sending interval, in s).
* `pwd abc` (Sets WiFi password to 'abc').
* `reset` (Restarts the ESP). * `reset` (Restarts the ESP).
* `reset_config` (Resets the complete IotWeb config).
* `reset_scd` (Resets SCD30). * `reset_scd` (Resets SCD30).
* `save_config` (Saves the config to EEPROM).
* `send_local_ip` (Sends local IP and SSID via MQTT. Can be useful to find sensor). * `send_local_ip` (Sends local IP and SSID via MQTT. Can be useful to find sensor).
* `set_time 1618829570` (Sets time to the given UNIX time). * `set_time 1618829570` (Sets time to the given UNIX time).
* `show_csv` (Displays the complete CSV file on Serial). * `show_csv` (Displays the complete CSV file on Serial).
* `ssid name` (Sets SSID to 'name').
* `timer 30` (Sets measurement interval, in s). * `timer 30` (Sets measurement interval, in s).
* `wifi 0/1` (Turns Wifi on/off).
* `wifi_scan` (Scans available WiFi networks). * `wifi_scan` (Scans available WiFi networks).
The commands can be sent via the Serial interface, from the webpage or via MQTT. The commands can be sent via the Serial interface, from the webpage or via MQTT.
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment