Doc

ampel-firmware/ampel-firmware.ino

@@ -4,7 +4,43 @@
  *   This example is a modified IotWebConf01Minimal.ino, with added shell commands.
  *   
  *   Simply type "help" via Serial in order to see the available commands:
- *   
+ 
+      > help
+      'help' not supported. Available commands :
+        ap 0/1 (Enables/disables access point).
+        ap_pwd abc (Sets AP password to abc).
+        name abc (Sets ThingName to abc).
+        reset (Restarts the ESP).
+        reset_config (Resets the complete IotWeb config).
+        save_config (Saves the config to EEPROM).
+        ssid name (Sets SSID to name).
+        wifi 0/1 (Enables/disables WiFi).
+        wifi_pwd abc (Sets WiFi password to abc).
+        
+  * The commands allow you to setup the thing directly via Serial:
+        
+      > name my_thing
+      Calling : name('my_thing')
+      Setting Thing name to my_thing
+      
+      > ssid my_wifi
+      Calling : ssid('my_wifi')
+      Setting WiFi ssid to my_wifi
+      
+      > wifi_pwd my_wifi_password
+      Calling : wifi_pwd('my_wifi_password')
+      Setting WiFi password to my_wifi_password
+      
+      > ap_pwd p4ssw0rd
+      Calling : ap_pwd('p4ssw0rd')
+      Setting AP password to p4ssw0rd
+      
+      State changing from: 1 to 3
+      Connecting to [my_wifi] (password is hidden)
+      WiFi timeout (ms): 30000
+      State changed from: 1 to 3
+      ...
+      ...
  *   
  */
 
@@ -131,9 +167,9 @@ void setup()
 
 void loop() 
 {
-  // -- doLoop should be called as frequently as possible.
   iotWebConf.doLoop();
   shell::checkSerialInput();
+  delay(50);
 }
 
 /**