Merge. Ready for release

ampel-firmware/src/lib/IotWebConf/src/IotWebConfSettings.h

+/**
+ * IotWebConfSettings.h -- IotWebConf is an ESP8266/ESP32
+ *   non blocking WiFi/AP web configuration library for Arduino.
+ *   https://github.com/prampec/IotWebConf
+ *
+ * Copyright (C) 2020 Balazs Kelemen <prampec+arduino@gmail.com>
+ *
+ * This software may be modified and distributed under the terms
+ * of the MIT license.  See the LICENSE file for details.
+ */
+
+#ifndef IotWebConfSettings_h
+#define IotWebConfSettings_h
+
+#if __has_include("custom_ampel_iotwebconf.h")
+  #include "custom_ampel_iotwebconf.h"
+#endif
+
+// -- We might want to place the config in the EEPROM in an offset.
+#ifndef IOTWEBCONF_CONFIG_START
+# define IOTWEBCONF_CONFIG_START 0
+#endif
+
+// -- Maximal length of any string used in IotWebConfig configuration (e.g.
+// ssid).
+#ifndef IOTWEBCONF_WORD_LEN
+# define IOTWEBCONF_WORD_LEN 33
+#endif
+// -- Maximal length of password used in IotWebConfig configuration.
+#ifndef IOTWEBCONF_PASSWORD_LEN
+# define IOTWEBCONF_PASSWORD_LEN 33
+#endif
+
+// -- IotWebConf tries to connect to the local network for an amount of time
+// before falling back to AP mode.
+#ifndef IOTWEBCONF_DEFAULT_WIFI_CONNECTION_TIMEOUT_MS
+# define IOTWEBCONF_DEFAULT_WIFI_CONNECTION_TIMEOUT_MS 30000
+#endif
+
+// -- Thing will stay in AP mode for an amount of time on boot, before retrying
+// to connect to a WiFi network.
+#ifndef IOTWEBCONF_DEFAULT_AP_MODE_TIMEOUT_SECS
+# define IOTWEBCONF_DEFAULT_AP_MODE_TIMEOUT_SECS "30"
+#endif
+
+// -- mDNS should allow you to connect to this device with a hostname provided
+// by the device. E.g. mything.local
+// (This is not very likely to work, and MDNS is not very well documented.)
+#ifndef IOTWEBCONF_CONFIG_DONT_USE_MDNS
+# define IOTWEBCONF_CONFIG_USE_MDNS 80
+#endif
+
+// -- Logs progress information to Serial if enabled.
+#ifndef IOTWEBCONF_DEBUG_DISABLED
+# define IOTWEBCONF_DEBUG_TO_SERIAL
+#endif
+
+// -- Logs passwords to Serial if enabled.
+//#define IOTWEBCONF_DEBUG_PWD_TO_SERIAL
+
+// -- Helper define for serial debug
+#ifdef IOTWEBCONF_DEBUG_TO_SERIAL
+# define IOTWEBCONF_DEBUG_LINE(MSG) Serial.println(MSG)
+#else
+# define IOTWEBCONF_DEBUG_LINE(MSG)
+#endif
+
+// -- EEPROM config starts with a special prefix of length defined here.
+#ifndef IOTWEBCONF_CONFIG_VERSION_LENGTH
+# define IOTWEBCONF_CONFIG_VERSION_LENGTH 4
+#endif
+
+#ifndef IOTWEBCONF_DNS_PORT
+# define IOTWEBCONF_DNS_PORT 53
+#endif
+
+#endif
\ No newline at end of file

ampel-firmware/src/lib/IotWebConf/src/IotWebConfTParameter.h

+/**
+ * IotWebConfTParameter.h -- IotWebConf is an ESP8266/ESP32
+ *   non blocking WiFi/AP web configuration library for Arduino.
+ *   https://github.com/prampec/IotWebConf
+ *
+ * Copyright (C) 2021 Balazs Kelemen <prampec+arduino@gmail.com>
+ *                    rovo89
+ *
+ * This software may be modified and distributed under the terms
+ * of the MIT license.  See the LICENSE file for details.
+ */
+
+#ifndef IotWebConfTParameter_h
+#define IotWebConfTParameter_h
+
+// TODO: This file is a mess. Help wanted to organize thing!
+
+#include "IotWebConfParameter.h"
+#include <Arduino.h>
+#include <IPAddress.h>
+#include <errno.h>
+
+// At least in PlatformIO, strtoimax/strtoumax are defined, but not implemented.
+#if 1
+#define strtoimax strtoll
+#define strtoumax strtoull
+#endif
+
+namespace iotwebconf
+{
+
+/**
+ * This class is to hide web related properties from the
+ *  data manipulation.
+ */
+class ConfigItemBridge : public ConfigItem
+{
+public:
+  virtual void update(WebRequestWrapper* webRequestWrapper) override
+  {
+      if (webRequestWrapper->hasArg(this->getId()))
+      {
+        String newValue = webRequestWrapper->arg(this->getId());
+        this->update(newValue);
+      }
+  }
+  void debugTo(Stream* out) override
+  {
+    out->print("'");
+    out->print(this->getId());
+    out->print("' with value: '");
+    out->print(this->toString());
+    out->println("'");
+  }
+
+protected:
+  ConfigItemBridge(const char* id) : ConfigItem(id) { }
+  virtual int getInputLength() { return 0; };
+  virtual bool update(String newValue, bool validateOnly = false) = 0;
+  virtual String toString() = 0;
+};
+
+///////////////////////////////////////////////////////////////////////////
+
+/**
+ * DataType is the data related part of the parameter.
+ * It does not care about web and visualization, but takes care of the
+ *  data validation and storing.
+ */
+template <typename ValueType, typename _DefaultValueType = ValueType>
+class DataType : virtual public ConfigItemBridge
+{
+public:
+  using DefaultValueType = _DefaultValueType;
+
+  DataType(const char* id, DefaultValueType defaultValue) :
+    ConfigItemBridge(id),
+    _defaultValue(defaultValue)
+  {
+  }
+
+  /**
+   * value() can be used to get the value, but it can also
+   * be used set it like this: p.value() = newValue
+   */
+  ValueType& value() { return this->_value; }
+  ValueType& operator*() { return this->_value; }
+
+protected:
+  int getStorageSize() override
+  {
+    return sizeof(ValueType);
+  }
+
+  virtual bool update(String newValue, bool validateOnly = false) = 0;
+  bool validate(String newValue) { return update(newValue, true); }
+  virtual String toString() override { return String(this->_value); }
+
+  ValueType _value;
+  const DefaultValueType _defaultValue;
+};
+
+///////////////////////////////////////////////////////////////////////////
+
+class StringDataType : public DataType<String>
+{
+public:
+  using DataType<String>::DataType;
+
+protected:
+  virtual bool update(String newValue, bool validateOnly) override {
+    if (!validateOnly)
+    {
+      this->_value = newValue;
+    }
+    return true;
+  }
+  virtual String toString() override { return this->_value; }
+};
+
+///////////////////////////////////////////////////////////////////////////
+
+template <size_t len>
+class CharArrayDataType : public DataType<char[len], const char*>
+{
+public:
+using DataType<char[len], const char*>::DataType;
+  CharArrayDataType(const char* id, const char* defaultValue) :
+    ConfigItemBridge::ConfigItemBridge(id),
+    DataType<char[len], const char*>::DataType(id, defaultValue) { };
+  virtual void applyDefaultValue() override
+  {
+    strncpy(this->_value, this->_defaultValue, len);
+  }
+
+protected:
+  virtual bool update(String newValue, bool validateOnly) override
+  {
+    if (newValue.length() + 1 > len)
+    {
+      return false;
+    }
+    if (!validateOnly)
+    {
+#ifdef IOTWEBCONF_DEBUG_TO_SERIAL
+      Serial.print(this->getId());
+      Serial.print(": ");
+      Serial.println(newValue);
+#endif
+      strncpy(this->_value, newValue.c_str(), len);
+    }
+    return true;
+  }
+  void storeValue(std::function<void(
+    SerializationData* serializationData)> doStore) override
+  {
+    SerializationData serializationData;
+    serializationData.length = len;
+    serializationData.data = (byte*)this->_value;
+    doStore(&serializationData);
+  }
+  void loadValue(std::function<void(
+    SerializationData* serializationData)> doLoad) override
+  {
+    SerializationData serializationData;
+    serializationData.length = len;
+    serializationData.data = (byte*)this->_value;
+    doLoad(&serializationData);
+  }
+  virtual int getInputLength() override { return len; };
+};
+
+///////////////////////////////////////////////////////////////////////////
+
+/**
+ * All non-complex types should be inherited from this base class.
+ */
+template <typename ValueType>
+class PrimitiveDataType : public DataType<ValueType>
+{
+public:
+using DataType<ValueType>::DataType;
+  PrimitiveDataType(const char* id, ValueType defaultValue) :
+    ConfigItemBridge::ConfigItemBridge(id),
+    DataType<ValueType>::DataType(id, defaultValue) { };
+
+  void setMax(ValueType val) { this->_max = val; this->_maxDefined = true; }
+  void setMin(ValueType val) { this->_min = val; this->_minDefined = true; }
+
+  virtual void applyDefaultValue() override
+  {
+    this->_value = this->_defaultValue;
+  }
+
+protected:
+  virtual bool update(String newValue, bool validateOnly) override
+  {
+    errno = 0;
+    ValueType val = fromString(newValue);
+    if ((errno == ERANGE)
+      || (this->_minDefined && (val < this->_min))
+      || (this->_maxDefined && (val > this->_max)))
+    {
+#ifdef IOTWEBCONF_DEBUG_TO_SERIAL
+      Serial.print(this->getId());
+      Serial.print(" value not accepted: ");
+      Serial.println(val);
+#endif
+      return false;
+    }
+    if (!validateOnly)
+    {
+#ifdef IOTWEBCONF_DEBUG_TO_SERIAL
+      Serial.print(this->getId());
+      Serial.print(": ");
+      Serial.println((ValueType)val);
+#endif
+      this->_value = (ValueType) val;
+    }
+    return true;
+  }
+  void storeValue(std::function<void(
+    SerializationData* serializationData)> doStore) override
+  {
+    SerializationData serializationData;
+    serializationData.length = this->getStorageSize();
+    serializationData.data =
+      reinterpret_cast<byte*>(&this->_value);
+    doStore(&serializationData);
+  }
+  void loadValue(std::function<void(
+    SerializationData* serializationData)> doLoad) override
+  {
+    byte buf[this->getStorageSize()];
+    SerializationData serializationData;
+    serializationData.length = this->getStorageSize();
+    serializationData.data = buf;
+    doLoad(&serializationData);
+    ValueType* valuePointer = reinterpret_cast<ValueType*>(buf);
+    this->_value = *valuePointer;
+  }
+  virtual ValueType fromString(String stringValue) = 0;
+
+  ValueType getMax() { return this->_max; }
+  ValueType getMin() { return this->_min; }
+  ValueType isMaxDefined() { return this->_maxDefined; }
+  ValueType isMinDefined() { return this->_minDefined; }
+
+private:
+  ValueType _min;
+  ValueType _max;
+  bool _minDefined = false;
+  bool _maxDefined = false;
+};
+
+///////////////////////////////////////////////////////////////////////////
+
+template <typename ValueType, int base = 10>
+class SignedIntDataType : public PrimitiveDataType<ValueType>
+{
+public:
+  SignedIntDataType(const char* id, ValueType defaultValue) :
+    ConfigItemBridge::ConfigItemBridge(id),
+    PrimitiveDataType<ValueType>::PrimitiveDataType(id, defaultValue) { };
+
+protected:
+  virtual ValueType fromString(String stringValue)
+  {
+    return (ValueType)strtoimax(stringValue.c_str(), nullptr, base);
+  }
+};
+
+template <typename ValueType, int base = 10>
+class UnsignedIntDataType : public PrimitiveDataType<ValueType>
+{
+public:
+  UnsignedIntDataType(const char* id, ValueType defaultValue) :
+    ConfigItemBridge::ConfigItemBridge(id),
+    PrimitiveDataType<ValueType>::PrimitiveDataType(id, defaultValue) { };
+
+protected:
+  virtual ValueType fromString(String stringValue)
+  {
+    return (ValueType)strtoumax(stringValue.c_str(), nullptr, base);
+  }
+};
+
+class BoolDataType : public PrimitiveDataType<bool>
+{
+public:
+  BoolDataType(const char* id, bool defaultValue) :
+    ConfigItemBridge::ConfigItemBridge(id),
+    PrimitiveDataType<bool>::PrimitiveDataType(id, defaultValue) { };
+
+protected:
+  virtual bool fromString(String stringValue)
+  {
+    return stringValue.c_str()[0] == 1;
+  }
+};
+
+class FloatDataType : public PrimitiveDataType<float>
+{
+public:
+  FloatDataType(const char* id, float defaultValue) :
+    ConfigItemBridge::ConfigItemBridge(id),
+    PrimitiveDataType<float>::PrimitiveDataType(id, defaultValue) { };
+
+protected:
+  virtual float fromString(String stringValue)
+  {
+    return atof(stringValue.c_str());
+  }
+};
+
+class DoubleDataType : public PrimitiveDataType<double>
+{
+public:
+  DoubleDataType(const char* id, double defaultValue) :
+    ConfigItemBridge::ConfigItemBridge(id),
+    PrimitiveDataType<double>::PrimitiveDataType(id, defaultValue) { };
+
+protected:
+  virtual double fromString(String stringValue)
+  {
+    return strtod(stringValue.c_str(), nullptr);
+  }
+};
+
+/////////////////////////////////////////////////////////////////////////
+
+class IpDataType : public DataType<IPAddress>
+{
+using DataType<IPAddress>::DataType;
+
+protected:
+  virtual bool update(String newValue, bool validateOnly) override
+  {
+    if (validateOnly)
+    {
+      IPAddress ip;
+      return ip.fromString(newValue);
+    }
+    else
+    {
+      return this->_value.fromString(newValue);
+    }
+  }
+
+  virtual String toString() override { return this->_value.toString(); }
+};
+
+///////////////////////////////////////////////////////////////////////////
+
+/**
+ * Input parameter is the part of the parameter that is responsible
+ * for the appearance of the parameter in HTML.
+ */
+class InputParameter : virtual public ConfigItemBridge
+{
+public:
+  InputParameter(const char* id, const char* label) :
+    ConfigItemBridge::ConfigItemBridge(id),
+    label(label) { }
+
+  virtual void renderHtml(
+    bool dataArrived, WebRequestWrapper* webRequestWrapper) override
+  {
+    String content = this->renderHtml(
+      dataArrived,
+      webRequestWrapper->hasArg(this->getId()),
+      webRequestWrapper->arg(this->getId()));
+    webRequestWrapper->sendContent(content);
+  }
+
+  const char* label;
+
+  /**
+   * This variable is meant to store a value that is displayed in an empty
+   *   (not filled) field.
+   */
+  const char* placeholder = nullptr;
+  virtual void setPlaceholder(const char* placeholder) { this->placeholder = placeholder; }
+
+  /**
+   * Usually this variable is used when rendering the form input field
+   *   so one can customize the rendered outcome of this particular item.
+   */
+  const char* customHtml = nullptr;
+
+  /**
+   * Used when rendering the input field. Is is overridden by different
+   *   implementations.
+   */
+  virtual String getCustomHtml()
+  {
+    return String(customHtml == nullptr ? "" : customHtml);
+  }
+
+  const char* errorMessage = nullptr;
+
+protected:
+  void clearErrorMessage() override
+  {
+    this->errorMessage = nullptr;
+  }
+
+  virtual String renderHtml(
+    bool dataArrived, bool hasValueFromPost, String valueFromPost)
+  {
+    String pitem = String(this->getHtmlTemplate());
+
+    pitem.replace("{b}", this->label);
+    pitem.replace("{t}", this->getInputType());
+    pitem.replace("{i}", this->getId());
+    pitem.replace(
+      "{p}", this->placeholder == nullptr ? "" : this->placeholder);
+    int length = this->getInputLength();
+    if (length > 0)
+    {
+      char parLength[11];
+      snprintf(parLength, 11, "%d", length - 1); // To allow "\0" at the end of the string.
+      String maxLength = String("maxlength=") + parLength;
+      pitem.replace("{l}", maxLength);
+    }
+    else
+    {
+      pitem.replace("{l}", "");
+    }
+    if (hasValueFromPost)
+    {
+      // -- Value from previous submit
+      pitem.replace("{v}", valueFromPost);
+    }
+    else
+    {
+      // -- Value from config
+      pitem.replace("{v}", this->toString());
+    }
+    pitem.replace("{c}", this->getCustomHtml());
+    pitem.replace(
+        "{s}",
+        this->errorMessage == nullptr ? "" : "de"); // Div style class.
+    pitem.replace(
+        "{e}",
+        this->errorMessage == nullptr ? "" : this->errorMessage);
+
+    return pitem;
+  }
+
+  /**
+   * One can override this method in case a specific HTML template is required
+   * for a parameter.
+   */
+  virtual String getHtmlTemplate() { return FPSTR(IOTWEBCONF_HTML_FORM_PARAM); };
+  virtual const char* getInputType() = 0;
+};
+
+template <size_t len>
+class TextTParameter : public CharArrayDataType<len>, public InputParameter
+{
+public:
+using CharArrayDataType<len>::CharArrayDataType;
+  TextTParameter(const char* id, const char* label, const char* defaultValue) :
+    ConfigItemBridge(id),
+    CharArrayDataType<len>::CharArrayDataType(id, defaultValue),
+    InputParameter::InputParameter(id, label) { }
+
+protected:
+  virtual const char* getInputType() override { return "text"; }
+};
+
+class CheckboxTParameter : public BoolDataType, public InputParameter
+{
+public:
+  CheckboxTParameter(const char* id, const char* label, const bool defaultValue) :
+    ConfigItemBridge(id),
+    BoolDataType::BoolDataType(id, defaultValue),
+    InputParameter::InputParameter(id, label) { }
+  bool isChecked() { return this->value(); }
+
+protected:
+  virtual const char* getInputType() override { return "checkbox"; }
+
+  virtual void update(WebRequestWrapper* webRequestWrapper) override
+  {
+      bool selected = false;
+      if (webRequestWrapper->hasArg(this->getId()))
+      {
+        String valueFromPost = webRequestWrapper->arg(this->getId());
+        selected = valueFromPost.equals("selected");
+      }
+//      this->update(String(selected ? "1" : "0"));
+#ifdef IOTWEBCONF_DEBUG_TO_SERIAL
+      Serial.print(this->getId());
+      Serial.print(": ");
+      Serial.println(selected ? "selected" : "not selected");
+#endif
+      this->_value = selected;
+  }
+
+  virtual String renderHtml(
+    bool dataArrived, bool hasValueFromPost, String valueFromPost) override
+  {
+    bool checkSelected = false;
+    if (dataArrived)
+    {
+      if (hasValueFromPost && valueFromPost.equals("selected"))
+      {
+        checkSelected = true;
+      }
+    }
+    else
+    {
+      if (this->isChecked())
+      {
+        checkSelected = true;
+      }
+    }
+
+    if (checkSelected)
+    {
+      this->customHtml = CheckboxTParameter::_checkedStr;
+    }
+    else
+    {
+      this->customHtml = nullptr;
+    }
+    
+    return InputParameter::renderHtml(dataArrived, true, String("selected"));
+  }
+private:
+  const char* _checkedStr = "checked='checked'";
+};
+
+template <size_t len>
+class PasswordTParameter : public CharArrayDataType<len>, public InputParameter
+{
+public:
+using CharArrayDataType<len>::CharArrayDataType;
+  PasswordTParameter(const char* id, const char* label, const char* defaultValue) :
+    ConfigItemBridge(id),
+    CharArrayDataType<len>::CharArrayDataType(id, defaultValue),
+    InputParameter::InputParameter(id, label)
+  {
+    this->customHtml = _customHtmlPwd;
+  }
+
+  void debugTo(Stream* out)
+  {
+    out->print("'");
+    out->print(this->getId());
+    out->print("' with value: ");
+#ifdef IOTWEBCONF_DEBUG_PWD_TO_SERIAL
+    out->print("'");
+    out->print(this->_value);
+    out->println("'");
+#else
+    out->println(F("<hidden>"));
+#endif
+  }
+
+  virtual bool update(String newValue, bool validateOnly) override
+  {
+    if (newValue.length() + 1 > len)
+    {
+      return false;
+    }
+    if (validateOnly)
+    {
+      return true;
+    }
+
+#ifdef IOTWEBCONF_DEBUG_TO_SERIAL
+    Serial.print(this->getId());
+    Serial.print(": ");
+#endif
+    if (newValue != this->_value)
+    {
+      // -- Value was set.
+      strncpy(this->_value, newValue.c_str(), len);
+#ifdef IOTWEBCONF_DEBUG_TO_SERIAL
+# ifdef IOTWEBCONF_DEBUG_PWD_TO_SERIAL
+      Serial.println(this->_value);
+# else
+      Serial.println("<updated>");
+# endif
+#endif
+    }
+    else
+    {
+#ifdef IOTWEBCONF_DEBUG_TO_SERIAL
+      Serial.println("<was not changed>");
+#endif
+    }
+    return true;
+  }
+
+protected:
+  virtual const char* getInputType() override { return "password"; }
+  virtual String renderHtml(
+    bool dataArrived, bool hasValueFromPost, String valueFromPost) override
+  {
+    return InputParameter::renderHtml(dataArrived, true, String(this->_value));
+  }
+private:
+  const char* _customHtmlPwd = "ondblclick=\"pw(this.id)\"";
+};
+
+/**
+ * All non-complex type input parameters should be inherited from this
+ *  base class.
+ */
+template <typename ValueType>
+class PrimitiveInputParameter :
+  public InputParameter
+{
+public:
+  PrimitiveInputParameter(const char* id, const char* label) :
+    ConfigItemBridge::ConfigItemBridge(id),
+    InputParameter::InputParameter(id, label) { }
+
+  virtual String getCustomHtml() override
+  {
+    String modifiers = String(this->customHtml);
+
+    if (this->isMinDefined())
+    {
+      modifiers += " min='" ;
+      modifiers += this->getMin();
+      modifiers += "'";
+    }
+    if (this->isMaxDefined())
+    {
+      modifiers += " max='";
+      modifiers += this->getMax();
+      modifiers += "'";
+    }
+    if (this->step != 0)
+    {
+      modifiers += " step='";
+      modifiers += this->step;
+      modifiers += "'";
+    }
+
+    return modifiers;
+  }
+
+  ValueType step = 0;
+  void setStep(ValueType step) { this->step = step; }
+  virtual ValueType getMin() = 0;
+  virtual ValueType getMax() = 0;
+  virtual bool isMinDefined() = 0;
+  virtual bool isMaxDefined() = 0;
+};
+
+template <typename ValueType, int base = 10>
+class IntTParameter :
+  public virtual SignedIntDataType<ValueType, base>,
+  public PrimitiveInputParameter<ValueType>
+{
+public:
+  IntTParameter(const char* id, const char* label, ValueType defaultValue) :
+    ConfigItemBridge(id),
+    SignedIntDataType<ValueType, base>::SignedIntDataType(id, defaultValue),
+    PrimitiveInputParameter<ValueType>::PrimitiveInputParameter(id, label) { }
+
+  // TODO: somehow organize these methods into common parent.
+  virtual ValueType getMin() override
+  {
+    return PrimitiveDataType<ValueType>::getMin();
+  }
+  virtual ValueType getMax() override
+  {
+    return PrimitiveDataType<ValueType>::getMax();
+  }
+
+  virtual bool isMinDefined() override
+  {
+    return PrimitiveDataType<ValueType>::isMinDefined();
+  }
+  virtual bool isMaxDefined() override
+  {
+    return PrimitiveDataType<ValueType>::isMaxDefined();
+  }
+
+protected:
+  virtual const char* getInputType() override { return "number"; }
+};
+
+template <typename ValueType, int base = 10>
+class UIntTParameter :
+  public virtual UnsignedIntDataType<ValueType, base>,
+  public PrimitiveInputParameter<ValueType>
+{
+public:
+  UIntTParameter(const char* id, const char* label, ValueType defaultValue) :
+    ConfigItemBridge(id),
+    UnsignedIntDataType<ValueType, base>::UnsignedIntDataType(id, defaultValue),
+    PrimitiveInputParameter<ValueType>::PrimitiveInputParameter(id, label) { }
+
+  // TODO: somehow organize these methods into common parent.
+  virtual ValueType getMin() override
+  {
+    return PrimitiveDataType<ValueType>::getMin();
+  }
+  virtual ValueType getMax() override
+  {
+    return PrimitiveDataType<ValueType>::getMax();
+  }
+
+  virtual bool isMinDefined() override
+  {
+    return PrimitiveDataType<ValueType>::isMinDefined();
+  }
+  virtual bool isMaxDefined() override
+  {
+    return PrimitiveDataType<ValueType>::isMaxDefined();
+  }
+
+protected:
+  virtual const char* getInputType() override { return "number"; }
+};
+
+class FloatTParameter :
+  public FloatDataType,
+  public PrimitiveInputParameter<float>
+{
+public:
+  FloatTParameter(const char* id, const char* label, float defaultValue) :
+    ConfigItemBridge(id),
+    FloatDataType::FloatDataType(id, defaultValue),
+    PrimitiveInputParameter<float>::PrimitiveInputParameter(id, label) { }
+
+  virtual float getMin() override
+  {
+    return PrimitiveDataType<float>::getMin();
+  }
+  virtual float getMax() override
+  {
+    return PrimitiveDataType<float>::getMax();
+  }
+
+  virtual bool isMinDefined() override
+  {
+    return PrimitiveDataType<float>::isMinDefined();
+  }
+  virtual bool isMaxDefined() override
+  {
+    return PrimitiveDataType<float>::isMaxDefined();
+  }
+
+protected:
+  virtual const char* getInputType() override { return "number"; }
+};
+
+/**
+ * Options parameter is a structure, that handles multiple values when redering
+ * the HTML representation.
+ */
+template <size_t len>
+class OptionsTParameter : public TextTParameter<len>
+{
+public:
+  /**
+   * @optionValues - List of values to choose from with, where each value
+   *   can have a maximal size of 'length'. Contains 'optionCount' items.
+   * @optionNames - List of names to render for the values, where each
+   *   name can have a maximal size of 'nameLength'. Contains 'optionCount'
+   *   items.
+   * @optionCount - Size of both 'optionValues' and 'optionNames' lists.
+   * @nameLength - Size of any item in optionNames list.
+   * (See TextParameter for arguments!)
+   */
+  OptionsTParameter(
+    const char* id, const char* label, const char* defaultValue,
+    const char* optionValues, const char* optionNames,
+    size_t optionCount, size_t nameLength) :
+    ConfigItemBridge(id),
+    TextTParameter<len>(id, label, defaultValue)
+  {
+    this->_optionValues = optionValues;
+    this->_optionNames = optionNames;
+    this->_optionCount = optionCount;
+    this->_nameLength = nameLength;
+  }
+
+  // TODO: make these protected
+  void setOptionValues(const char* optionValues) { this->_optionValues = optionValues; }
+  void setOptionNames(const char* optionNames) { this->_optionNames = optionNames; }
+  void setOptionCount(size_t optionCount) { this->_optionCount = optionCount; }
+  void setNameLength(size_t nameLength) { this->_nameLength = nameLength; }
+protected:
+  OptionsTParameter(
+    const char* id, const char* label, const char* defaultValue) :
+    ConfigItemBridge(id),
+    TextTParameter<len>(id, label, defaultValue)
+  {
+  }
+
+  const char* _optionValues;
+  const char* _optionNames;
+  size_t _optionCount;
+  size_t _nameLength;
+};
+
+///////////////////////////////////////////////////////////////////////////////
+
+/**
+ * Select parameter is an option parameter, that rendered as HTML SELECT.
+ * Basically it is a dropdown combobox.
+ */
+template <size_t len>
+class SelectTParameter : public OptionsTParameter<len>
+{
+public:
+  /**
+   * Create a select parameter for the config portal.
+   *
+   * (See OptionsParameter for arguments!)
+   */
+  SelectTParameter(
+    const char* id, const char* label, const char* defaultValue,
+    const char* optionValues, const char* optionNames,
+    size_t optionCount, size_t nameLength) :
+    ConfigItemBridge(id),
+    OptionsTParameter<len>(
+      id, label, defaultValue, optionValues, optionNames, optionCount, nameLength)
+    { }
+  // TODO: make this protected
+  SelectTParameter(
+    const char* id, const char* label, const char* defaultValue) :
+    ConfigItemBridge(id),
+    OptionsTParameter<len>(id, label, defaultValue) { }
+
+protected:
+  // Overrides
+  virtual String renderHtml(
+    bool dataArrived, bool hasValueFromPost, String valueFromPost) override
+  {
+    String options = "";
+
+    for (size_t i=0; i<this->_optionCount; i++)
+    {
+      const char *optionValue = (this->_optionValues + (i*len) );
+      const char *optionName = (this->_optionNames + (i*this->_nameLength) );
+      String oitem = FPSTR(IOTWEBCONF_HTML_FORM_OPTION);
+      oitem.replace("{v}", optionValue);
+//    if (sizeof(this->_optionNames) > i)
+      {
+        oitem.replace("{n}", optionName);
+      }
+//    else
+//    {
+//      oitem.replace("{n}", "?");
+//    }
+      if ((hasValueFromPost && (valueFromPost == optionValue)) ||
+        (strncmp(this->value(), optionValue, len) == 0))
+      {
+        // -- Value from previous submit
+        oitem.replace("{s}", " selected");
+      }
+      else
+      {
+        // -- Value from config
+        oitem.replace("{s}", "");
+      }
+
+      options += oitem;
+    }
+
+    String pitem = FPSTR(IOTWEBCONF_HTML_FORM_SELECT_PARAM);
+
+    pitem.replace("{b}", this->label);
+    pitem.replace("{i}", this->getId());
+    pitem.replace(
+        "{c}", this->customHtml == nullptr ? "" : this->customHtml);
+    pitem.replace(
+        "{s}",
+        this->errorMessage == nullptr ? "" : "de"); // Div style class.
+    pitem.replace(
+        "{e}",
+        this->errorMessage == nullptr ? "" : this->errorMessage);
+    pitem.replace("{o}", options);
+
+    return pitem;
+  }
+
+private:
+};
+
+
+///////////////////////////////////////////////////////////////////////////////
+
+/**
+ * Color chooser.
+ */
+class ColorTParameter : public CharArrayDataType<8>, public InputParameter
+{
+public:
+using CharArrayDataType<8>::CharArrayDataType;
+  ColorTParameter(const char* id, const char* label, const char* defaultValue) :
+    ConfigItemBridge(id),
+    CharArrayDataType<8>::CharArrayDataType(id, defaultValue),
+    InputParameter::InputParameter(id, label) { }
+
+protected:
+  virtual const char* getInputType() override { return "color"; }
+};
+
+///////////////////////////////////////////////////////////////////////////////
+
+/**
+ * Date chooser.
+ */
+class DateTParameter : public CharArrayDataType<11>, public InputParameter
+{
+public:
+using CharArrayDataType<11>::CharArrayDataType;
+  DateTParameter(const char* id, const char* label, const char* defaultValue) :
+    ConfigItemBridge(id),
+    CharArrayDataType<11>::CharArrayDataType(id, defaultValue),
+    InputParameter::InputParameter(id, label) { }
+
+protected:
+  virtual const char* getInputType() override { return "date"; }
+};
+
+///////////////////////////////////////////////////////////////////////////////
+
+/**
+ * Time chooser.
+ */
+class TimeTParameter : public CharArrayDataType<6>, public InputParameter
+{
+public:
+using CharArrayDataType<6>::CharArrayDataType;
+  TimeTParameter(const char* id, const char* label, const char* defaultValue) :
+    ConfigItemBridge(id),
+    CharArrayDataType<6>::CharArrayDataType(id, defaultValue),
+    InputParameter::InputParameter(id, label) { }
+
+protected:
+  virtual const char* getInputType() override { return "time"; }
+};
+
+} // end namespace
+
+#include "IotWebConfTParameterBuilder.h"
+
+#endif

ampel-firmware/src/lib/IotWebConf/src/IotWebConfTParameterBuilder.h

+/**
+ * IotWebConfTParameter.h -- IotWebConf is an ESP8266/ESP32
+ *   non blocking WiFi/AP web configuration library for Arduino.
+ *   https://github.com/prampec/IotWebConf
+ *
+ * Copyright (C) 2021 Balazs Kelemen <prampec+arduino@gmail.com>
+ *                    rovo89
+ *
+ * This software may be modified and distributed under the terms
+ * of the MIT license.  See the LICENSE file for details.
+ */
+
+#ifndef IotWebConfTParameterBuilder_h
+#define IotWebConfTParameterBuilder_h
+
+#include "IotWebConfTParameter.h"
+
+namespace iotwebconf
+{
+
+template <typename ParamType> class Builder;
+
+template <typename ParamType>
+class AbstractBuilder
+{
+public:
+  AbstractBuilder(const char* id) : _id(id) { };
+  virtual ParamType build() const
+  {
+    ParamType instance = std::move(
+      ParamType(this->_id, this->_label, this->_defaultValue));
+    this->apply(&instance);
+    return instance;
+  }
+
+  Builder<ParamType>& label(const char* label)
+    { this->_label = label; return static_cast<Builder<ParamType>&>(*this); }
+  Builder<ParamType>& defaultValue(typename ParamType::DefaultValueType defaultValue)
+    { this->_defaultValue = defaultValue; return static_cast<Builder<ParamType>&>(*this); }
+
+protected:
+  virtual ParamType* apply(ParamType* instance) const
+  {
+    return instance;
+  }
+  const char* _label;
+  const char* _id;
+  typename ParamType::DefaultValueType _defaultValue;
+};
+
+template <typename ParamType>
+class Builder : public AbstractBuilder<ParamType>
+{
+public:
+  Builder(const char* id) : AbstractBuilder<ParamType>(id) { };
+};
+
+///////////////////////////////////////////////////////////////////////////
+
+template <typename ValueType, typename ParamType>
+class PrimitiveBuilder :
+  public AbstractBuilder<ParamType>
+{
+public:
+  PrimitiveBuilder<ValueType, ParamType>(const char* id) :
+    AbstractBuilder<ParamType>(id) { };
+  Builder<ParamType>& min(ValueType min) { this->_minDefined = true; this->_min = min; return static_cast<Builder<ParamType>&>(*this); }
+  Builder<ParamType>& max(ValueType max) { this->_maxDefined = true; this->_max = max; return static_cast<Builder<ParamType>&>(*this); }
+  Builder<ParamType>& step(ValueType step) { this->_step = step; return static_cast<Builder<ParamType>&>(*this); }
+  Builder<ParamType>& placeholder(const char* placeholder) { this->_placeholder = placeholder; return static_cast<Builder<ParamType>&>(*this); }
+
+protected:
+  virtual ParamType* apply(
+     ParamType* instance) const override
+  {
+    if (this->_minDefined)
+    {
+      instance->setMin(this->_min);
+    }
+    if (this->_maxDefined)
+    {
+      instance->setMax(this->_max);
+    }
+    instance->setStep(this->_step);
+    instance->setPlaceholder(this->_placeholder);
+    return instance;
+  }
+
+  bool _minDefined = false;
+  bool _maxDefined = false;
+  ValueType _min;
+  ValueType _max;
+  ValueType _step = 0;
+  const char* _placeholder = nullptr;
+};
+
+template <typename ValueType, int base>
+class Builder<IntTParameter<ValueType, base>> :
+  public PrimitiveBuilder<ValueType, IntTParameter<ValueType, base>>
+{
+public:
+  Builder<IntTParameter<ValueType, base>>(const char* id) :
+    PrimitiveBuilder<ValueType, IntTParameter<ValueType, base>>(id) { };
+};
+
+template <typename ValueType, int base>
+class Builder<UIntTParameter<ValueType, base>> :
+  public PrimitiveBuilder<ValueType, UIntTParameter<ValueType, base>>
+{
+public:
+  Builder<UIntTParameter<ValueType, base>>(const char* id) :
+    PrimitiveBuilder<ValueType, UIntTParameter<ValueType, base>>(id) { };
+};
+
+template <>
+class Builder<FloatTParameter> :
+  public PrimitiveBuilder<float, FloatTParameter>
+{
+public:
+  Builder<FloatTParameter>(const char* id) :
+    PrimitiveBuilder<float, FloatTParameter>(id) { };
+};
+
+
+template <size_t len>
+class Builder<SelectTParameter<len>> :
+  public AbstractBuilder<SelectTParameter<len>>
+{
+public:
+  Builder<SelectTParameter<len>>(const char* id) :
+    AbstractBuilder<SelectTParameter<len>>(id) { };
+
+  virtual SelectTParameter<len> build() const override
+  {
+    return SelectTParameter<len>(
+      this->_id, this->_label, this->_defaultValue,
+      this->_optionValues, this->_optionNames,
+      this->_optionCount, this->_nameLength);
+  }
+
+  Builder<SelectTParameter<len>>& optionValues(const char* optionValues)
+    { this->_optionValues = optionValues; return *this; }
+  Builder<SelectTParameter<len>>& optionNames(const char* optionNames)
+    { this->_optionNames = optionNames; return *this; }
+  Builder<SelectTParameter<len>>& optionCount(size_t optionCount)
+    { this->_optionCount = optionCount; return *this; }
+  Builder<SelectTParameter<len>>& nameLength(size_t nameLength)
+    { this->_nameLength = nameLength; return *this; }
+
+protected:
+  virtual SelectTParameter<len>* apply(
+     SelectTParameter<len>* instance) const override
+  {
+    instance->setOptionValues(this->_optionValues);
+    instance->setOptionNames(this->_optionNames);
+    instance->setOptionCount(this->_optionCount);
+    instance->setNameLength(this->_nameLength);
+    return instance;
+  }
+
+private:
+  const char* _optionValues;
+  const char* _optionNames;
+  size_t _optionCount;
+  size_t _nameLength;
+};
+
+} // End namespace
+
+#endif

ampel-firmware/src/lib/IotWebConf/src/IotWebConfUsing.h

+/**
+ * IotWebConfUsing.h -- IotWebConf is an ESP8266/ESP32
+ *   non blocking WiFi/AP web configuration library for Arduino.
+ *   https://github.com/prampec/IotWebConf
+ *
+ * Copyright (C) 2020 Balazs Kelemen <prampec+arduino@gmail.com>
+ *
+ * This software may be modified and distributed under the terms
+ * of the MIT license.  See the LICENSE file for details.
+ */
+
+#ifndef IotWebConfUsing_h
+#define IotWebConfUsing_h
+
+// This "using" lines are just aliases, and should avoided.
+
+using IotWebConfParameterGroup = iotwebconf::ParameterGroup;
+using IotWebConfTextParameter = iotwebconf::TextParameter;
+using IotWebConfPasswordParameter = iotwebconf::PasswordParameter;
+using IotWebConfNumberParameter = iotwebconf::NumberParameter;
+using IotWebConfCheckboxParameter = iotwebconf::CheckboxParameter;
+using IotWebConfSelectParameter = iotwebconf::SelectParameter;
+
+#endif
\ No newline at end of file

ampel-firmware/src/lib/IotWebConf/src/IotWebConfWebServerWrapper.h

+/**
+ * IotWebConfWebServerWrapper.h -- IotWebConf is an ESP8266/ESP32
+ *   non blocking WiFi/AP web configuration library for Arduino.
+ *   https://github.com/prampec/IotWebConf
+ *
+ * Copyright (C) 2020 Balazs Kelemen <prampec+arduino@gmail.com>
+ *
+ * This software may be modified and distributed under the terms
+ * of the MIT license.  See the LICENSE file for details.
+ */
+
+#ifndef WebServerWrapper_h
+#define WebServerWrapper_h
+
+#include <Arduino.h>
+#include <IPAddress.h>
+
+namespace iotwebconf
+{
+
+class WebRequestWrapper
+{
+public:
+  virtual const String hostHeader() const;
+  virtual IPAddress localIP();
+  virtual uint16_t localPort();
+  virtual const String uri() const;
+  virtual bool authenticate(const char * username, const char * password);
+  virtual void requestAuthentication();
+  virtual bool hasArg(const String& name);
+  virtual String arg(const String name);
+  virtual void sendHeader(const String& name, const String& value, bool first = false);
+  virtual void setContentLength(const size_t contentLength);
+  virtual void send(int code, const char* content_type = nullptr, const String& content = String(""));
+  virtual void sendContent(const String& content);
+  virtual void stop();
+};
+
+class WebServerWrapper
+{
+public:
+  virtual void handleClient();
+  virtual void begin();
+};
+
+} // end namespace
+#endif
\ No newline at end of file

ampel-firmware/src/lib/IotWebConf/src/custom_ampel_iotwebconf.h

+#ifndef CustomAmpelIotWebConfSettings_h
+#define CustomAmpelIotWebConfSettings_h
+/***************************************/
+/**** CUSTOM AMPEL CODE ****************/
+
+// Disable DEBUG, in order to save some space, at least on ESP8266
+
+#define IOTWEBCONF_DEBUG_DISABLED
+
+// Change this value (between 0 & 3000) in order to force the config to be reloaded.
+#define IOTWEBCONF_CONFIG_START 512
+
+#endif
\ No newline at end of file

ampel-firmware/src/lib/NTPClient/NTPClient.cpp

@@ -149,20 +149,6 @@ int NTPClient::getSeconds() const {
   return (this->getEpochTime() % 60);
 }
 
-String NTPClient::getFormattedTime() const {
-  unsigned long rawTime = this->getEpochTime();
-  unsigned long hours = (rawTime % 86400L) / 3600;
-  String hoursStr = hours < 10 ? "0" + String(hours) : String(hours);
-
-  unsigned long minutes = (rawTime % 3600) / 60;
-  String minuteStr = minutes < 10 ? "0" + String(minutes) : String(minutes);
-
-  unsigned long seconds = rawTime % 60;
-  String secondStr = seconds < 10 ? "0" + String(seconds) : String(seconds);
-
-  return hoursStr + ":" + minuteStr + ":" + secondStr;
-}
-
 void NTPClient::end() {
   this->_udp->stop();
 

ampel-firmware/src/lib/NTPClient/NTPClient.h

@@ -20,7 +20,7 @@ class NTPClient {
 
     unsigned long _updateInterval = 60000;  // In ms
 
-    unsigned long _currentEpoc    = 0;      // In s
+    unsigned long _currentEpoc    = 0;      // In ms
     unsigned long _lastUpdate     = 0;      // In ms
 
     byte          _packetBuffer[NTP_PACKET_SIZE];
@@ -97,11 +97,6 @@ class NTPClient {
      */
     void setUpdateInterval(unsigned long updateInterval);
 
-    /**
-     * @return time formatted like `hh:mm:ss`
-     */
-    String getFormattedTime() const;
-
     /**
      * @return time in seconds since Jan. 1, 1970
      */

ampel-firmware/util.h

@@ -8,7 +8,7 @@
 #  define esp_get_heap_fragmentation() ESP.getHeapFragmentation()
 #elif defined(ESP32)
 #  define esp_get_max_free_block_size() ESP.getMaxAllocHeap() //largest block of heap that can be allocated.
-#  define esp_get_heap_fragmentation() "?" // apparently not available for ESP32
+#  define esp_get_heap_fragmentation() -1 // apparently not available for ESP32
 #endif
 
 namespace util {
@@ -26,7 +26,7 @@ class Ampel {
 private:
   static void showFreeSpace();
 public:
-  const char *version = "v0.2.3"; // Update manually after significant changes.
+  const char *version = "v0.3.0"; // Update manually after significant changes.
   const char *board;
   const char *sensorId;
   const char *macAddress;

ampel-firmware/web_config.cpp

+#include "web_config.h"
+
+#define STRING_LEN 33 // Should be enough for ip, addresses, passwords...
+
+#define STRING(x) #x
+#define STRINGIFY(x) STRING(x) // Allows to call STRINGIFY(SOME_MACRO) and convert the value of SOME_MACRO to string
+
+#include "config.h"
+#ifndef MQTT_TOPIC_PREFIX
+#  error Missing config.h file. Please copy config.public.h to config.h.
+#  warning config.h has a new structure (e.g. AMPEL_WIFI should be set to true or false)
+#endif
+
+#include "util.h"
+#include "sensor_console.h"
+
+#include "src/lib/IotWebConf/src/IotWebConf.h"
+#include "src/lib/IotWebConf/src/IotWebConfTParameter.h"
+#include "src/lib/IotWebConf/src/IotWebConfOptionalGroup.h"
+
+//TODO: Convert all strings to F-strings
+
+namespace web_config {
+#if defined(ESP8266)
+  ESP8266WebServer http(80); // Create a webserver object that listens for HTTP request on port 80
+#elif defined(ESP32)
+  WebServer http(80);
+#endif
+
+  DNSServer dnsServer; //TODO: Check if needed
+
+  IotWebConf *iotWebConf;
+
+  const char config_version[IOTWEBCONF_CONFIG_VERSION_LENGTH] = AMPEL_CONFIG_VERSION; // -- Configuration specific key. The value should be modified if config structure was changed.
+  using namespace iotwebconf;
+  std::function<void()> _wifiConnectingCallback = nullptr;
+  std::function<void()> _apModeCallback= nullptr;
+
+  /**
+   * WiFi params
+   */
+  CheckboxTParameter ampelWifiParam =
+      Builder<CheckboxTParameter>("WiFi").label("WiFi?").defaultValue(AMPEL_WIFI).build();
+  IntTParameter<uint16_t> wifiTimeoutParam =
+      Builder<IntTParameter<uint16_t>>("wifi_timeout").label("WiFi timeout").defaultValue(WIFI_TIMEOUT).min(0).placeholder(
+          "[s]").build();
+
+  //TODO: Distribute to corresponding classes, possibly with callbacks?
+  /**
+   * CO2 sensor
+   */
+  ParameterGroup co2Params = ParameterGroup("co2", "CO2 Sensor");
+
+  IntTParameter<uint16_t> timestepParam =
+      Builder<IntTParameter<uint16_t>>("timestep").label("Measurement timestep").defaultValue(MEASUREMENT_TIMESTEP).min(
+          2).max(1800).placeholder("[s]").build();
+
+  FloatTParameter temperatureOffsetParam =
+      Builder<FloatTParameter>("temp_offset").label("Temperature offset").defaultValue(TEMPERATURE_OFFSET).placeholder(
+          "[K]").step(0.1).build();
+
+  IntTParameter<uint16_t> altitudeParam = Builder<IntTParameter<uint16_t>>("altitude").label("Altitude").defaultValue(
+  ALTITUDE_ABOVE_SEA_LEVEL).min(0).step(1).placeholder("[m]").build();
+
+  IntTParameter<uint16_t> atmosphericCO2Param = Builder<IntTParameter<uint16_t>>("atmospheric_co2").label(
+      "Atmospheric CO2 concentration").defaultValue(
+  ATMOSPHERIC_CO2_CONCENTRATION).min(400).max(2000).step(1).placeholder("ppm").build();
+
+  CheckboxTParameter autoCalibrateParam = Builder<CheckboxTParameter>("asc").label("Auto-calibration?").defaultValue(
+  AUTO_CALIBRATE_SENSOR).build();
+
+  /**
+   * LED
+   */
+  //NOTE: Could also be optional : for LED 0 / 1
+  ParameterGroup ledParams = ParameterGroup("LED", "LED");
+
+  IntTParameter<uint8_t> maxBrightnessParam =
+      Builder<IntTParameter<uint8_t>>("max_brightness").label("Max Brightness").defaultValue(MAX_BRIGHTNESS).min(0).max(
+          255).build();
+  IntTParameter<uint8_t> minBrightnessParam =
+      Builder<IntTParameter<uint8_t>>("min_brightness").label("Min Brightness").defaultValue(MIN_BRIGHTNESS).min(0).max(
+          255).build();
+  IntTParameter<uint16_t> ledCountParam = Builder<IntTParameter<uint16_t>>("led_count").label("LED ring").defaultValue(
+  LED_COUNT).min(12).max(16).step(4).build();
+
+  /**
+   * CSV
+   */
+  OptionalParameterGroup csvParams = OptionalParameterGroup("CSV", "CSV", AMPEL_CSV);
+
+  IntTParameter<uint16_t> csvIntervalParam =
+      Builder<IntTParameter<uint16_t>>("csv_interval").label("CSV interval").defaultValue(CSV_INTERVAL).min(0).step(1).placeholder(
+          "[s]").build();
+
+  /**
+   * MQTT
+   */
+  OptionalParameterGroup mqttParams = OptionalParameterGroup("MQTT", "MQTT", AMPEL_MQTT);
+
+  IntTParameter<uint16_t> mqttIntervalParam =
+      Builder<IntTParameter<uint16_t>>("mqtt_interval").label("MQTT interval").defaultValue(MQTT_SENDING_INTERVAL).min(
+          0).step(1).defaultValue(300).placeholder("[s]").build();
+
+  CheckboxTParameter mqttEncryptionParam =
+      Builder<CheckboxTParameter>("mqtt_encryption").label("Encrypt MQTT?").defaultValue(MQTT_ENCRYPTED).build();
+
+  CheckboxTParameter mqttCommandsParam =
+      Builder<CheckboxTParameter>("mqtt_commands").label("Allow MQTT commands?").defaultValue(ALLOW_MQTT_COMMANDS).build();
+
+  TextTParameter<STRING_LEN> mqttServerParam =
+      Builder<TextTParameter<STRING_LEN>>("mqtt_server").label("MQTT Server").defaultValue(MQTT_SERVER).build();
+
+  IntTParameter<uint16_t> mqttPortParam = Builder<IntTParameter<uint16_t>>("mqtt_port").label("MQTT Port").defaultValue(
+  MQTT_PORT).build();
+
+  TextTParameter<STRING_LEN> mqttUserParam =
+      Builder<TextTParameter<STRING_LEN>>("mqtt_user").label("MQTT User").defaultValue(MQTT_USER).build();
+
+  PasswordTParameter<STRING_LEN> mqttPasswordParam = Builder<PasswordTParameter<STRING_LEN>>("mqtt_password").label(
+      "MQTT password").defaultValue(MQTT_PASSWORD).build();
+
+  TextTParameter<STRING_LEN> mqttTopicPrefixParam =
+      Builder<TextTParameter<STRING_LEN>>("mqtt_topic").label("MQTT Topic prefix").defaultValue(MQTT_TOPIC_PREFIX).build();
+  /**
+   * NTP Time
+   */
+
+  ParameterGroup timeParams = ParameterGroup("NTP", "Time server");
+  TextTParameter<STRING_LEN> ntpServerParam =
+      Builder<TextTParameter<STRING_LEN>>("ntp_server").label("NTP Server").defaultValue(NTP_SERVER).build();
+  IntTParameter<int16_t> timeOffsetParam = Builder<IntTParameter<int16_t>>("timezone").label("Timezone").defaultValue(
+  UTC_OFFSET).min(-23).max(23).step(1).placeholder("[h]").build();
+  CheckboxTParameter dstParam = Builder<CheckboxTParameter>("dst").label("Daylight Saving Time?").defaultValue(
+  DAYLIGHT_SAVING_TIME).build();
+
+  /**
+   * LoRaWAN
+   */
+#if defined(ESP32)
+  OptionalParameterGroup loraParams = OptionalParameterGroup("LoRaWan", "LoRaWan", AMPEL_LORAWAN);
+  IntTParameter<uint16_t> loraIntervalParam =
+      Builder<IntTParameter<uint16_t>>("lora_interval").label("LoRa interval").defaultValue(LORAWAN_SENDING_INTERVAL).min(
+          0).step(1).defaultValue(300).placeholder("[s]").build();
+
+  TextTParameter<17> deviceEUIParam = Builder<TextTParameter<17>>("device_eui").label("Device EUI (MSB)").defaultValue(
+  LORAWAN_DEVICE_EUI).build();
+  TextTParameter<17> appEUIParam = Builder<TextTParameter<17>>("app_eui").label("App EUI (MSB)").defaultValue(
+  LORAWAN_APPLICATION_EUI).build();
+  PasswordTParameter<33> appKeyParam = Builder<PasswordTParameter<33>>("app_key").label("App key (MSB)").defaultValue(
+  LORAWAN_APPLICATION_KEY).build();
+#endif
+
+  OptionalGroupHtmlFormatProvider optionalGroupHtmlFormatProvider;
+
+  void update() {
+    iotWebConf->doLoop(); // Listen for HTTP requests from clients
+  }
+
+  void setWifiConnectionCallback(void (*success_function)()) {
+    iotWebConf->setWifiConnectionCallback(success_function);
+  }
+
+  void setWifiConnectingCallback(void (*fn)()) {
+    _wifiConnectingCallback = fn;
+  }
+
+  void setApModeCallback(void (*fn)()) {
+    _apModeCallback = fn;
+  }
+
+  void setWifiFailCallback(void (*fail_function)()) {
+    std::function<WifiAuthInfo* ()> fail_and_return_null = [fail_function]() {
+      fail_function();
+      return nullptr;
+    };
+    iotWebConf->setWifiConnectionFailedHandler(fail_and_return_null);
+  }
+
+  void defineStructure() {
+    iotWebConf->setHtmlFormatProvider(&optionalGroupHtmlFormatProvider);
+
+    iotWebConf->addSystemParameter(&ampelWifiParam);
+    // Somehow, making ampelWifi invisible set it to 0 :-/
+    //    ampelWifiParam.visible = false; // To avoid users getting locked out. In order to set WiFi on/off, console commands can be used.
+    iotWebConf->addSystemParameter(&wifiTimeoutParam);
+
+    iotWebConf->getThingNameParameter()->label = "Ampel name";
+    iotWebConf->getApPasswordParameter()->label = "Ampel password (user : 'admin')";
+    iotWebConf->getApTimeoutParameter()->label = "Access Point timeout";
+    iotWebConf->getApTimeoutParameter()->visible = true;
+
+    iotWebConf->getApPasswordParameter()->defaultValue = AMPEL_PASSWORD;
+    iotWebConf->getWifiSsidParameter()->defaultValue = WIFI_SSID;
+    iotWebConf->getWifiPasswordParameter()->defaultValue = WIFI_PASSWORD;
+    iotWebConf->getApTimeoutParameter()->defaultValue = STRINGIFY(ACCESS_POINT_TIMEOUT); // Defined as number in config.h but stored as string in webconf.
+
+    co2Params.addItem(&timestepParam);
+    co2Params.addItem(&temperatureOffsetParam);
+    co2Params.addItem(&altitudeParam);
+    co2Params.addItem(&atmosphericCO2Param);
+    co2Params.addItem(&autoCalibrateParam);
+
+    ledParams.addItem(&minBrightnessParam);
+    ledParams.addItem(&maxBrightnessParam);
+    ledParams.addItem(&ledCountParam);
+
+    timeParams.addItem(&ntpServerParam);
+    timeParams.addItem(&timeOffsetParam);
+    timeParams.addItem(&dstParam);
+
+    csvParams.addItem(&csvIntervalParam);
+
+    mqttParams.addItem(&mqttIntervalParam);
+    mqttParams.addItem(&mqttServerParam);
+    mqttParams.addItem(&mqttPortParam);
+    mqttParams.addItem(&mqttUserParam);
+    mqttParams.addItem(&mqttPasswordParam);
+    mqttParams.addItem(&mqttTopicPrefixParam);
+    mqttParams.addItem(&mqttEncryptionParam);
+    mqttParams.addItem(&mqttCommandsParam);
+
+#if defined(ESP32)
+    loraParams.addItem(&loraIntervalParam);
+    loraParams.addItem(&deviceEUIParam);
+    loraParams.addItem(&appEUIParam);
+    loraParams.addItem(&appKeyParam);
+#endif
+
+    iotWebConf->addParameterGroup(&co2Params);
+    iotWebConf->addParameterGroup(&ledParams);
+    iotWebConf->addParameterGroup(&timeParams);
+    iotWebConf->addParameterGroup(&csvParams);
+    iotWebConf->addParameterGroup(&mqttParams);
+#if defined(ESP32)
+    iotWebConf->addParameterGroup(&loraParams);
+#endif
+  }
+
+  void defineCommands() {
+    sensor_console::defineCommand("save_config", config::save, F("(Saves the config to EEPROM)"));
+
+    sensor_console::defineCommand("reset_config", []() {
+      Serial.println(F("Resetting config..."));
+      iotWebConf->getRootParameterGroup()->applyDefaultValue();
+      iotWebConf->saveConfig();
+      Serial.println(F("Done!"));
+    }, F("(Resets the complete IotWeb config)"));
+
+    sensor_console::defineStringCommand("ssid", [](char *ssid) {
+      Serial.print(F("Setting WiFi ssid to "));
+      Serial.println(ssid);
+      strlcpy(iotWebConf->getWifiSsidParameter()->valueBuffer, ssid, iotWebConf->getWifiSsidParameter()->getLength());
+      iotWebConf->saveConfig();
+    },   F("name (Sets SSID to name)"));
+
+    sensor_console::defineStringCommand("pwd", [](char *ssid) {
+      Serial.print(F("Setting WiFi password to "));
+      Serial.println(ssid);
+      strlcpy(iotWebConf->getWifiPasswordParameter()->valueBuffer, ssid, iotWebConf->getWifiPasswordParameter()->getLength());
+      iotWebConf->saveConfig();
+    }, F("abc (Sets WiFi password to abc)"));
+
+    sensor_console::defineIntCommand("wifi", [](int32_t onOff) {
+      config::is_wifi_on = onOff;
+      iotWebConf->saveConfig();
+      Serial.print(F("WiFi - "));
+      Serial.println(onOff ? F("On!") : F("Off!"));
+    }, F("0/1 (Turns Wifi on/off)"));
+  }
+
+  void initialize() {
+    iotWebConf = new IotWebConf(strlen(AMPEL_NAME) == 0 ? ampel.sensorId : AMPEL_NAME, &dnsServer, &http, "",
+        config_version);
+
+    defineStructure();
+
+    defineCommands();
+
+    iotWebConf->loadConfig();
+
+    if (!config::is_wifi_on) {
+      Serial.println(F("Wifi is off : no access point or connection. Use 'wifi 1' to turn on again!"));
+      return;
+    }
+
+    //NOTE: Can only work if wifi is on.
+    sensor_console::defineIntCommand("ap", [](int onOff) {
+      if (onOff) {
+        Serial.print(F("Enable "));
+      } else {
+        Serial.print(F("Disable "));
+      }
+      Serial.println(F("AP mode!"));
+      iotWebConf->forceApMode(onOff);
+    }, F("0/1 (Enables/disables access point)"));
+
+    iotWebConf->setStateChangedCallback([](NetworkState in, NetworkState out){
+      if (out == NetworkState::Connecting && _wifiConnectingCallback != nullptr){
+        _wifiConnectingCallback();
+      } else if (out == NetworkState::ApMode && _apModeCallback != nullptr){
+        _apModeCallback();
+      }
+    });
+
+
+    iotWebConf->setWifiConnectionTimeoutMs(1000UL * config::wifi_timeout);
+
+    iotWebConf->skipApStartup();
+
+    iotWebConf->init();
+
+    http.on("/config", [] {
+      iotWebConf->handleConfig();
+    });
+
+    http.onNotFound([]() {
+      iotWebConf->handleNotFound();
+    });
+  }
+}
+
+/***
+ * Define all the corresponding config values as reference, so that they can be updated.
+ */
+namespace config {
+
+  char* ampel_name() {
+    return web_config::iotWebConf->getThingName();
+  }
+
+  char* selected_ssid() {
+    return web_config::iotWebConf->getWifiSsidParameter()->valueBuffer;
+  }
+
+  char* ampel_password() {
+    return web_config::iotWebConf->getApPasswordParameter()->valueBuffer;
+  }
+
+  // Sensor
+  uint16_t &measurement_timestep = web_config::timestepParam.value(); // [s] Value between 2 and 1800 (range for SCD30 sensor).
+  uint16_t &altitude_above_sea_level = web_config::altitudeParam.value(); // [m]
+  uint16_t &co2_calibration_level = web_config::atmosphericCO2Param.value(); // [ppm]
+  bool &auto_calibrate_sensor = web_config::autoCalibrateParam.value(); // [true / false]
+  float &temperature_offset = web_config::temperatureOffsetParam.value(); // [K] Sign isn't relevant.
+
+  bool &is_wifi_on = web_config::ampelWifiParam.value();
+  uint16_t &wifi_timeout = web_config::wifiTimeoutParam.value();
+  void save() {
+    web_config::iotWebConf->saveConfig();
+  }
+
+  // LEDs
+  uint8_t &max_brightness = web_config::maxBrightnessParam.value();
+  uint8_t &min_brightness = web_config::minBrightnessParam.value();
+  uint16_t &led_count = web_config::ledCountParam.value();
+
+  // Time server
+  char *ntp_server = web_config::ntpServerParam.value();
+  int16_t &time_zone = web_config::timeOffsetParam.value();
+  bool &daylight_saving_time = web_config::dstParam.value();
+
+  // CSV
+  bool is_csv_active() {
+    return web_config::csvParams.isActive();
+  }
+  uint16_t &csv_interval = web_config::csvIntervalParam.value();
+
+  // MQTT
+  bool is_mqtt_active() {
+    return web_config::mqttParams.isActive();
+  }
+  char *mqtt_server = web_config::mqttServerParam.value();
+  char *mqtt_user = web_config::mqttUserParam.value();
+  char *mqtt_password = web_config::mqttPasswordParam.value();
+  char *mqtt_topic_prefix = web_config::mqttTopicPrefixParam.value();
+  uint16_t &mqtt_port = web_config::mqttPortParam.value();
+  uint16_t &mqtt_sending_interval = web_config::mqttIntervalParam.value();
+  bool &mqtt_encryption = web_config::mqttEncryptionParam.value();
+  bool &allow_mqtt_commands = web_config::mqttCommandsParam.value();
+
+// LORAWAN
+#if defined(ESP32)
+  bool is_lorawan_active() {
+    return web_config::loraParams.isActive();
+  }
+  uint16_t &lorawan_sending_interval = web_config::loraIntervalParam.value();
+  char *lorawan_device_eui = web_config::deviceEUIParam.value();
+  char *lorawan_app_key = web_config::appKeyParam.value();
+  char *lorawan_app_eui = web_config::appEUIParam.value();
+#endif
+}

ampel-firmware/web_config.h

+#ifndef AMPEL_WEB_CONFIG_H_
+#define AMPEL_WEB_CONFIG_H_
+
+#if defined(ESP8266)
+#  include <ESP8266WebServer.h>
+#elif defined(ESP32)
+#  include <WebServer.h>
+#endif
+
+namespace config {
+  void save(); // Save config to EEPROM
+
+  char* ampel_name();
+  // WiFi
+  char* selected_ssid();
+  char* ampel_password(); // For Access Point, and for HTML page
+  extern bool &is_wifi_on; // [true / false]
+  extern uint16_t &wifi_timeout; // [s]
+
+  // Sensor
+  extern uint16_t &measurement_timestep; // [s] Value between 2 and 1800 (range for SCD30 sensor).
+  extern uint16_t &altitude_above_sea_level; // [m]
+  extern uint16_t &co2_calibration_level; // [ppm]
+  extern bool &auto_calibrate_sensor; // [true / false]
+  extern float &temperature_offset; // [K] Sign isn't relevant.
+
+  // LED
+  extern uint8_t &max_brightness;
+  extern uint8_t &min_brightness;
+  extern uint16_t &led_count;
+
+  // Time server
+  extern char *ntp_server;
+  extern int16_t &time_zone; // [h]
+  extern bool &daylight_saving_time; // [true / false]
+
+  //CSV
+  bool is_csv_active(); // [true / false]
+  extern uint16_t &csv_interval; // [s]
+
+  // MQTT
+  bool is_mqtt_active(); // [true / false]
+  extern char *mqtt_server;
+  extern char *mqtt_user;
+  extern char *mqtt_password;
+  extern char *mqtt_topic_prefix;
+  extern uint16_t &mqtt_port;
+  extern uint16_t &mqtt_sending_interval; // [s]
+  extern bool &mqtt_encryption; // [true / false]
+  extern bool &allow_mqtt_commands; // [true / false]
+
+  // HTTP
+  const char http_user[] = "admin"; // "admin" by default
+
+  // LORAWAN
+#if defined(ESP32)
+  bool is_lorawan_active(); // also defined for ESP8266, and set to false
+  extern uint16_t &lorawan_sending_interval;
+  extern char *lorawan_device_eui;
+  extern char *lorawan_app_key;
+  extern char *lorawan_app_eui;
+#endif
+
+  // Transmission rate
+  constexpr uint32_t bauds = 115200;
+}
+
+namespace web_config {
+  void initialize();
+  void setWifiConnectionCallback(void (*success_function)());
+  void setWifiFailCallback(void (*fail_function)());
+  void setWifiConnectingCallback(void (*connecting_function)());
+  void setApModeCallback(void (*ap_mode_function)());
+  void update();
+
+#if defined(ESP8266)
+  extern ESP8266WebServer http;
+#elif defined(ESP32)
+  extern WebServer http;
+#endif
+}
+#endif

ampel-firmware/web_server.cpp

 #include "web_server.h"
 
-#if defined(ESP8266)
-#  include <ESP8266WebServer.h>
-#elif defined(ESP32)
-#  include <WebServer.h>
-#endif
-
-#include "config.h"
+#include "web_config.h"
 #include "util.h"
 #include "ntp.h"
 #include "wifi_util.h"
 #include "co2_sensor.h"
 #include "sensor_console.h"
-#ifdef AMPEL_CSV
-#  include "csv_writer.h"
-#endif
-#ifdef AMPEL_MQTT
-#  include "mqtt.h"
-#endif
-#ifdef AMPEL_LORAWAN
-#  include "lorawan.h"
-#endif
+#include "csv_writer.h"
+#include "mqtt.h"
+#include "lorawan.h"
 
-namespace config {
-  // Values should be defined in config.h
-#ifdef HTTP_USER
-  const char *http_user = HTTP_USER;
-#else
-  const char *http_user = "";
-#endif
-#ifdef HTTP_PASSWORD
-  const char *http_password = HTTP_PASSWORD;
-#else
-  const char *http_password = "";
+#if defined(ESP8266)
+#  include <ESP8266WebServer.h>
+#elif defined(ESP32)
+#  include <WebServer.h>
 #endif
 
-}
-
 namespace web_server {
 
   const char *header_template;
-  const char *body_template;
+  const char *body1_template;
+  const char *body2_template;
   const char *script_template;
   void handleWebServerRoot();
   void handlePageNotFound();
   void handleWebServerCommand();
 
-#ifdef AMPEL_CSV
   void handleDeleteCSV();
   void handleWebServerCSV();
-#endif
 
-#if defined(ESP8266)
-  ESP8266WebServer http(80); // Create a webserver object that listens for HTTP request on port 80
-#elif defined(ESP32)
-  WebServer http(80);
-#endif
+  const __FlashStringHelper* showHTMLIf(bool is_active) {
+    return is_active ? F("") : F("hidden");
+  }
 
-  void update() {
-    http.handleClient(); // Listen for HTTP requests from clients
+  const __FlashStringHelper* yesOrNo(bool is_active) {
+    return is_active ? F("Yes") : F("No");
   }
 
-  void initialize() {
+  void definePages() {
     header_template =
         PSTR("<!doctype html><html lang=en>"
-            "<head>\n"
-            "<title>%d ppm - CO2 SENSOR - %s - %s</title>\n"
-            "<meta charset='UTF-8'>\n"
+            "<head>"
+            "<title>%d ppm - CO2 SENSOR - %s - %s</title>"
+            "<meta charset='UTF-8'>"
             // HfT Favicon
-            "<link rel='icon' type='image/png' sizes='16x16' href='data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABAAAAAQCAYAAAAf8/9hAAAABHNCSVQICAgIfAhkiAAAAHtJREFUOE9jvMnA+5+BAsBIFQMkl85h+P3kGcOb8jqwW+TPH2H4de0GA29UGNxtfx49YWCRk0HwHz5iuKegwwB2AS4DkA2F6VR6cAWsEQbgBqDY9vARw/ejJ+Au+LxsFcPz6BSwHpwGYPMCSS6gyAAKYhESiKMGjPgwAADopHVhn5ynEwAAAABJRU5ErkJggg=='/>\n"
+            "<link rel='icon' type='image/png' sizes='16x16' href='data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABAAAAAQCAYAAAAf8/9hAAAABHNCSVQICAgIfAhkiAAAAHtJREFUOE9jvMnA+5+BAsBIFQMkl85h+P3kGcOb8jqwW+TPH2H4de0GA29UGNxtfx49YWCRk0HwHz5iuKegwwB2AS4DkA2F6VR6cAWsEQbgBqDY9vARw/ejJ+Au+LxsFcPz6BSwHpwGYPMCSS6gyAAKYhESiKMGjPgwAADopHVhn5ynEwAAAABJRU5ErkJggg=='/>"
             // Responsive grid:
-            "<link rel='stylesheet' href='https://unpkg.com/purecss@2.0.3/build/pure-min.css'>\n"
-            "<link rel='stylesheet' href='https://unpkg.com/purecss@2.0.3/build/grids-responsive-min.css'>\n"
+            "<link rel='stylesheet' href='https://unpkg.com/purecss@2.0.6/build/pure-min.css'>"
+            "<link rel='stylesheet' href='https://unpkg.com/purecss@2.0.6/build/grids-responsive-min.css'>"
             // JS Graphs:
-            "<script src='https://cdn.plot.ly/plotly-basic-1.58.2.min.js'></script>\n"
+            "<script src='https://cdn.plot.ly/plotly-basic-2.9.0.min.js'></script>"
             // Fullscreen
-            "<meta name='viewport' content='width=device-width, initial-scale=1'>\n"
+            "<meta name='viewport' content='width=device-width, initial-scale=1'>"
             // Refresh after every measurement.
-            // "<meta http-equiv='refresh' content='%d'>\n"
-            "</head>\n"
-            "<body>\n"
+            // "<meta http-equiv='refresh' content='%d'>"
+            "</head>"
+            "<body>"
+            "<div class='pure-g'><div class='pure-u-1'><div class='pure-menu'><h2 class='pure-menu-heading'>HfT-Stuttgart CO<sub>2</sub> Ampel</h2></div></div>"
+            "<div class='pure-u-1'><ul class='pure-menu pure-menu-horizontal pure-menu-list'>"
+            "<li class='pure-menu-item'><a href='/config' class='pure-menu-link'>Config</a></li>"
+            "<li class='pure-menu-item'><a href='#table' class='pure-menu-link'>Info</a></li>"
+            "<li class='pure-menu-item'><a href='#graph' class='pure-menu-link'>Graph</a></li>"
+            "<li class='pure-menu-item'><a href='#log' class='pure-menu-link'>Log</a></li>");
 
-            "<div class='pure-g'><div class='pure-u-1'><div class='pure-menu'><p class='pure-menu-heading'>HfT-Stuttgart CO<sub>2</sub> Ampel</p></div></div>\n"
-            "<div class='pure-u-1'><ul class='pure-menu pure-menu-horizontal pure-menu-list'>\n"
-            "<li class='pure-menu-item'><a href='#table' class='pure-menu-link'>Info</a></li>\n"
-#ifdef AMPEL_CSV
-            "<li class='pure-menu-item'><a href='#graph' class='pure-menu-link'>Graph</a></li>\n"
-            "<li class='pure-menu-item'><a href='#log' class='pure-menu-link'>Log</a></li>\n"
-            "<li class='pure-menu-item'><a href='%s' class='pure-menu-link'>Download CSV</a></li>\n"
-#endif
-            "<li class='pure-menu-item' id='led'>&#11044;</li>\n" // LED
-            "</ul></div></div>\n"
-            "<script>\n"
+    body1_template =
+        PSTR(
+            "<li class='pure-menu-item'><a href='%s' class='pure-menu-link'>Download CSV</a></li>" "<li class='pure-menu-item' id='led'>&#11044;</li>" // LED
+            "</ul></div></div>" "<script>"
             // Show a colored dot on the webpage, with a similar color than on LED Ring.
-            "hue=(1-(Math.min(Math.max(parseInt(document.title),500),1600)-500)/1100)*120;\n"
-            "document.getElementById('led').style.color=['hsl(',hue,',100%%,50%%)'].join('');\n"
-            "</script>\n"
-            "<div class='pure-g'>\n"
-            "<div class='pure-u-1' id='graph'></div>\n"// Graph placeholder
-            "</div>\n"
-            "<div class='pure-g'>\n"
-            "<table id='table' class='pure-table-striped pure-u-1 pure-u-md-1-2'>\n");
-
-    body_template =
-        PSTR("<tr><th colspan='2'>%s</th></tr>\n"
-            "<tr><td>CO<sub>2</sub> concentration</td><td>%5d ppm</td></tr>\n"
-            "<tr><td>Temperature</td><td>%.1f&#8451;</td></tr>\n"
-            "<tr><td>Humidity</td><td>%.1f%%</td></tr>\n"
-            "<tr><td>Last measurement</td><td>%s</td></tr>\n"
-            "<tr><td>Measurement timestep</td><td>%5d s</td></tr>\n"
-#ifdef AMPEL_CSV
-            "<tr><th colspan='2'>CSV</th></tr>\n"
-            "<tr><td>Last write</td><td>%s</td></tr>\n"
-            "<tr><td>Timestep</td><td>%5d s</td></tr>\n"
-            "<tr><td>Available drive space</td><td>%d kB</td></tr>\n"
-#endif
-#ifdef AMPEL_MQTT
-            "<tr><th colspan='2'>MQTT</th></tr>\n"
-            "<tr><td>Connected?</td><td>%s</td></tr>\n"
-            "<tr><td>Last publish</td><td>%s</td></tr>\n"
-            "<tr><td>Timestep</td><td>%5d s</td></tr>\n"
+            "hue=(1-(Math.min(Math.max(parseInt(document.title),500),1600)-500)/1100)*120;" "document.getElementById('led').style.color=['hsl(',hue,',100%%,50%%)'].join('');" "</script>" "<div class='pure-g'>" "<div class='pure-u-1' id='graph'></div>"// Graph placeholder
+            "</div>" "<div class='pure-g'>" "<table id='table' class='pure-table-striped pure-u-1 pure-u-md-1-2'>" "<tr><th colspan='2'>%s</th></tr>" "<tr><td>CO<sub>2</sub></td><td>%5d ppm</td></tr>" "<tr><td>Temperature</td><td>%.1f&#8451;</td></tr>" "<tr><td>Humidity</td><td>%.1f%%</td></tr>" "<tr><td>Last measurement</td><td>%s</td></tr>" "<tr><td>Timestep</td><td>%5d s</td></tr>" "<tbody %s>" "<tr><th colspan='2'>CSV</th></tr>" "<tr><td>Last write</td><td>%s</td></tr>" "<tr><td>Interval</td><td>%5d s</td></tr>" "<tr><td>Available space</td><td>%d kB</td></tr>" "</tbody>" "<tbody %s>" "<tr><th colspan='2'>MQTT</th></tr>" "<tr><td>Connected?</td><td>%s</td></tr>" "<tr><td>Last publish</td><td>%s</td></tr>" "<tr><td>Interval</td><td>%5d s</td></tr>" "</tbody>"
+#if defined(ESP32)
+        "<tbody %s>"
+        "<tr><th colspan='2'>LoRaWAN</th></tr>"
+        "<tr><td>Connected?</td><td>%s</td></tr>"
+        "<tr><td>Frequency</td><td>%s MHz</td></tr>"
+        "<tr><td>Last transmission</td><td>%s</td></tr>"
+        "<tr><td>Interval</td><td>%5d s</td></tr>"
+        "</tbody>"
 #endif
-#if defined(AMPEL_LORAWAN) && defined(ESP32)
-            "<tr><th colspan='2'>LoRaWAN</th></tr>\n"
-            "<tr><td>Connected?</td><td>%s</td></tr>\n"
-            "<tr><td>Frequency</td><td>%s MHz</td></tr>\n"
-            "<tr><td>Last transmission</td><td>%s</td></tr>\n"
-            "<tr><td>Timestep</td><td>%5d s</td></tr>\n"
-#endif
-            "<tr><th colspan='2'>Sensor</th></tr>\n"
-            "<tr><td>Temperature offset</td><td>%.1fK</td></tr>\n" //TODO: Read it from sensor?
-            "<tr><td>Auto-calibration?</td><td>%s</td></tr>\n"
-            "<tr><td>Local address</td><td><a href='http://%s.local/'>%s.local</a></td></tr>\n"
-            "<tr><td>Local IP</td><td><a href='http://%s'>%s</a></td></tr>\n"
-            "<tr><td>MAC</td><td>%s</td></tr>\n"
-            "<tr><td>Free heap space</td><td>%6d bytes</td></tr>\n"
-            "<tr><td>Largest heap block</td><td>%6d bytes</td></tr>\n"
-            "<tr><td>Max loop duration</td><td>%5d ms</td></tr>\n"
-            "<tr><td>Board</td><td>%s</td></tr>\n"
-            "<tr><td>Ampel firmware</td><td>%s</td></tr>\n"
-            "<tr><td>Uptime</td><td>%2d d %4d h %02d min %02d s</td></tr>\n"
-            "</table>\n"
-            "<div id='log' class='pure-u-1 pure-u-md-1-2'></div>\n"
-            "<form action='/command'><input type='text' id='send' name='send'><input type='submit' value='Send'></form>\n"
-#ifdef AMPEL_CSV
+            );
+
+    body2_template =
+        PSTR(
+            "<tr><th colspan='2'>Sensor</th></tr>"
+                "<tr><td>Temperature offset</td><td>%.1fK</td></tr>"
+                "<tr><td>Auto-calibration?</td><td>%s</td></tr>"
+                "<tr><td>Local address</td><td><a href='http://%s.local/'>%s.local</a></td></tr>"
+                "<tr><td>Local IP</td><td><a href='http://%s'>%s</a></td></tr>"
+                "<tr><td>MAC</td><td>%s</td></tr>"
+                "<tr><td>Free heap space</td><td>%6d bytes</td></tr>"
+                "<tr><td>Largest heap block</td><td>%6d bytes</td></tr>"
+                "<tr><td>Frag</td><td>%3d%%</td></tr>"
+                "<tr><td>Max loop duration</td><td>%5d ms</td></tr>"
+                "<tr><td>Board</td><td>%s</td></tr>"
+                "<tr><td>ID</td><td>%s</td></tr>"
+                "<tr><td>Ampel firmware</td><td>%s</td></tr>"
+                "<tr><td>Uptime</td><td>%2d d %4d h %02d min %02d s</td></tr>"
+                "</table>"
+                "<div id='log' class='pure-u-1 pure-u-md-1-2'></div>"
+                "<form action='/command'><input type='text' id='send' name='send'><input type='submit' value='Send'></form>"
                 "<form action='/delete_csv' method='POST' onsubmit=\"return confirm('Are you really sure you want to delete all data?') && (document.body.style.cursor = 'wait');\">"
                 "<input type='submit' value='Delete CSV'/>"
-            "</form>\n"
-#endif
-            "</div>\n");
+                "</form>"
+                "<button onclick=\"fetch('/command?send=set_time '+Math.floor(Date.now()/1000))\" %s>Set time!</button>" // Can be useful in AP mode
+                "</div>"
+                "<a href='https://transfer.hft-stuttgart.de/gitlab/co2ampel/ampel-firmware' target='_blank'>Source code</a>&nbsp;"
+                "<a href='https://transfer.hft-stuttgart.de/gitlab/co2ampel/ampel-documentation' target='_blank'>Documentation</a>"
+                "<script>"
+                "document.body.style.cursor='default';");
 
-    script_template =
-        PSTR(
-            "<a href='https://transfer.hft-stuttgart.de/gitlab/co2ampel/ampel-firmware' target='_blank'>Source code</a>\n"
-                "<a href='https://transfer.hft-stuttgart.de/gitlab/co2ampel/ampel-documentation' target='_blank'>Documentation</a>\n"
-#ifdef AMPEL_CSV
-            "<script>\n"
-            "document.body.style.cursor = 'default';\n"
-            "fetch('%s',{credentials:'include'})\n"
-            ".then(response=>response.text())\n"
-            ".then(csvText=>csvToTable(csvText))\n"
-            ".then(htmlTable=>addLogTableToPage(htmlTable))\n"
-            ".then(_=>Plotly.newPlot('graph',data,layout,{displaylogo:false}))\n"
-            ".catch(e=>console.error(e));\n"
-            "xs=[];\n"
-            "data=[{x:xs,y:[],type:'scatter',name:'CO<sub>2</sub>',line:{color:'#2ca02c'}},\n"
-            "{x:xs,y:[],type:'scatter',name:'Temperature',yaxis:'y2',line:{color:'#ff7f0e',dash:'dot'}},\n"
-            "{x:xs,y:[],type:'scatter',name:'Humidity',yaxis:'y3',line:{color:'#1f77b4',dash:'dot'}}];\n"
-            "layout={height:600,title:'%s',legend:{xanchor:'right',x:0.2,y:1.0},\n"
-            "xaxis:{domain:[0.0,0.85]},yaxis:{ticksuffix:'ppm',range:[0,2000],dtick:200},\n"
-            "yaxis2:{overlaying:'y',side:'right',ticksuffix:'°C',position:0.9,anchor:'free',range:[0,30],dtick:3},\n"
-            "yaxis3:{overlaying:'y',side:'right',ticksuffix:'%%',position:0.95,anchor:'free',range:[0,100],dtick:10}\n"
-            "};\n"
-            "function csvToTable(csvText) {\n"
-            "csvText=csvText.trim();\n"
-            "lines=csvText.split('\\n');\n"
-            "table=document.createElement('table');\n"
-            "table.className='pure-table-striped';\n"
-            "n=lines.length;\n"
-            "lines.forEach((line,i)=>{\n"
-            "fields=line.split(';');\n"
-            "xs.push(fields[0]);\n"
-            "data[0]['y'].push(fields[1]);\n"
-            "data[1]['y'].push(fields[2]);\n"
-            "data[2]['y'].push(fields[3]);\n"
-            "if(i>4 && i<n-12){if(i==5){fields=['...','...','...','...']}else{return;}}\n"
-            "row=document.createElement('tr');\n"
-            "fields.forEach((field,index)=>{\n"
-            "cell=document.createElement(i<2?'th':'td');\n"
-            "cell.appendChild(document.createTextNode(field));\n"
-            "row.appendChild(cell);});\n"
-            "table.appendChild(row);});\n"
-            "return table;}\n"
-            "function addLogTableToPage(table){document.getElementById('log').appendChild(table);}\n"
-            "</script>\n"
-#endif
-            "</body>\n"
+    script_template = PSTR("fetch('%s',{credentials:'include'})"
+        ".then(r=>r.text())"
+        ".then(c2t)"
+        ".then(t=>document.getElementById('log').appendChild(t))"
+        ".then(_=>Plotly.newPlot('graph',data,layout,{displaylogo:false}))"
+        ".catch(console.error);"
+        "xs=[];y1=[];y2=[];y3=[];"
+        "d={x:xs,type:'scatter',mode:'lines+markers',marker:{size:3}};" // circle marker (symbol 0), from https://plotly.com/python/marker-style/
+        "data=["
+        "{...d,...{y:y1,name:'CO<sub>2</sub>',line:{color:'#2ca02c'}}},"
+        "{...d,...{y:y2,name:'Temperature',yaxis:'y2',line:{color:'#ff7f0e',dash:'dot'}}},"
+        "{...d,...{y:y3,name:'Humidity',yaxis:'y3',line:{color:'#1f77b4',dash:'dot'}}}];"
+        "layout={height:600,title:'%s',legend:{xanchor:'right',x:0.2,y:1.0},"
+        "xaxis:{domain:[0.0,0.85]},yaxis:{ticksuffix:'ppm',range:[0,2000],dtick:200},"
+        "yaxis2:{overlaying:'y',side:'right',ticksuffix:'°C',position:0.9,anchor:'free',range:[0,30],dtick:3},"
+        "yaxis3:{overlaying:'y',side:'right',ticksuffix:'%%',position:0.95,anchor:'free',range:[0,100],dtick:10}"
+        "};"
+        "function c2t(t){"
+        "t=t.trim();"
+        "ls=t.split('\\n');"
+        "tb=document.createElement('table');"
+        "tb.className='pure-table-striped';"
+        "n=ls.length;"
+        "ld=NaN;"
+        "ls.forEach((l,i)=>{"
+        "fs=l.split(';');"
+        //Don't display points without time
+        "if(fs[0].includes('1970-')){return};"
+        "d=Date.parse(fs[0]);"
+        //Split curves when points are more than 1h apart
+        "if(d-ld>36e5){"
+        "xs.push(NaN);"
+        "y1.push(NaN);"
+        "y2.push(NaN);"
+        "y3.push(NaN);"
+        "}"
+        "ld=d;"
+        "xs.push(fs[0]);"
+        "y1.push(fs[1]);"
+        "y2.push(fs[2]);"
+        "y3.push(fs[3]);"
+        "if(i>4&&i<n-12){if(i==5){fs=['...','...','...','...']}else{return;}}"
+        "r=document.createElement('tr');"
+        "fs.forEach((f,_)=>{"
+        "c=document.createElement(i<2?'th':'td');"
+        "c.appendChild(document.createTextNode(f));"
+        "r.appendChild(c);});"
+        "tb.appendChild(r);});"
+        "return tb;}"
+        "</script>"
+        "</body>"
         "</html>");
 
     // Web-server
-    http.on("/", handleWebServerRoot);
-    http.on("/command", handleWebServerCommand);
-#ifdef AMPEL_CSV
-    http.on(csv_writer::filename, handleWebServerCSV); //NOTE: csv_writer should have been initialized first.
-    http.on("/delete_csv", HTTP_POST, handleDeleteCSV);
-#endif
-    http.onNotFound(handlePageNotFound);
-    http.begin();
-
-    Serial.print(F("You can access this sensor via http://"));
-    Serial.print(ampel.sensorId);
-    Serial.print(F(".local (might be unstable) or http://"));
-    Serial.println(WiFi.localIP());
+    web_config::http.on("/", handleWebServerRoot);
+    web_config::http.on("/command", handleWebServerCommand);
+    web_config::http.on(csv_writer::filename, handleWebServerCSV);
+    web_config::http.on("/delete_csv", HTTP_POST, handleDeleteCSV);
   }
 
-  // Allow access if http_user or http_password are empty, or if provided credentials match
+  /*
+   * Allow access if Ampel is in access point mode,
+   * if http_user or http_password are empty,
+   * or if provided credentials match
+   */
   bool shouldBeAllowed() {
-    return strcmp(config::http_user, "") == 0 || strcmp(config::http_password, "") == 0
-        || http.authenticate(config::http_user, config::http_password);
+    return wifi::isAccessPoint() || strcmp(config::http_user, "") == 0 || strcmp(config::ampel_password(), "") == 0
+        || web_config::http.authenticate(config::http_user, config::ampel_password());
   }
 
   void handleWebServerRoot() {
-    if (!shouldBeAllowed()) {
-      return http.requestAuthentication(DIGEST_AUTH);
-    }
-
     unsigned long ss = seconds();
     uint8_t dd = ss / 86400;
     ss -= dd * 86400;
@@ -233,93 +189,86 @@ namespace web_server {
     uint8_t mm = ss / 60;
     ss -= mm * 60;
 
-    //NOTE: Splitting in multiple parts in order to use less RAM
-    char content[2000]; // Update if needed
-    // INFO - Header size : 1767 - Body size : 1991 - Script size : 1909
+    //NOTE: Splitting in multiple parts in order to use less RAM. Higher than 2000 apparently crashes the ESP8266
+    char content[1600];
+    // Current size (with Lorawan, timesteps and long thing name):
+    //    INFO - Header size : 1347 - Body1 size : 1448 - Body2 size : 1475 - Script size : 1507
 
-    snprintf_P(content, sizeof(content), header_template, sensor::co2, ampel.sensorId, wifi::local_ip
-#ifdef AMPEL_CSV
-        , csv_writer::filename
-#endif
-        );
+    snprintf_P(content, sizeof(content), header_template, sensor::co2, config::ampel_name(), wifi::local_ip);
 
-    //    Serial.print(F("INFO - Header size : "));
-    //    Serial.print(strlen(content));
-    http.setContentLength(CONTENT_LENGTH_UNKNOWN);
-    http.send_P(200, PSTR("text/html"), content);
+    Serial.print(F("INFO - Header size : "));
+    Serial.print(strlen(content));
+    web_config::http.setContentLength(CONTENT_LENGTH_UNKNOWN);
+    web_config::http.send_P(200, PSTR("text/html"), content);
 
     // Body
-    snprintf_P(content, sizeof(content), body_template, ampel.sensorId, sensor::co2, sensor::temperature,
-        sensor::humidity, sensor::timestamp, config::measurement_timestep,
-#ifdef AMPEL_CSV
-        csv_writer::last_successful_write, config::csv_interval, csv_writer::getAvailableSpace() / 1024,
-#endif
-#ifdef AMPEL_MQTT
-        mqtt::connected ? "Yes" : "No", mqtt::last_successful_publish, config::mqtt_sending_interval,
+    snprintf_P(content, sizeof(content), body1_template, csv_writer::filename, config::ampel_name(), sensor::co2,
+        sensor::temperature, sensor::humidity, sensor::timestamp, config::measurement_timestep,
+        showHTMLIf(config::is_csv_active()), csv_writer::last_successful_write, config::csv_interval,
+        csv_writer::getAvailableSpace() / 1024, showHTMLIf(config::is_mqtt_active()), yesOrNo(mqtt::connected),
+        mqtt::last_successful_publish, config::mqtt_sending_interval
+#if defined(ESP32)
+        , showHTMLIf(config::is_lorawan_active()), yesOrNo(lorawan::connected),
+        config::lorawan_frequency_plan, lorawan::last_transmission, config::lorawan_sending_interval
 #endif
-#if defined(AMPEL_LORAWAN) && defined(ESP32)
-        lorawan::connected ? "Yes" : "No", config::lorawan_frequency_plan, lorawan::last_transmission,
-        config::lorawan_sending_interval,
-#endif
-        config::temperature_offset, config::auto_calibrate_sensor ? "Yes" : "No", ampel.sensorId, ampel.sensorId,
-        wifi::local_ip, wifi::local_ip, ampel.macAddress, ESP.getFreeHeap(), esp_get_max_free_block_size(),
-        ampel.max_loop_duration, ampel.board, ampel.version, dd, hh, mm, ss);
+        );
+
+    Serial.print(F(" - Body1 size : "));
+    Serial.print(strlen(content));
+    web_config::http.sendContent(content);
 
-    //    Serial.print(F(" - Body size : "));
-    //    Serial.print(strlen(content));
-    http.sendContent(content);
+    snprintf_P(content, sizeof(content), body2_template, sensor::getTemperatureOffset(),
+        yesOrNo(config::auto_calibrate_sensor), config::ampel_name(), config::ampel_name(), wifi::local_ip,
+        wifi::local_ip, ampel.macAddress, ESP.getFreeHeap(), esp_get_max_free_block_size(),
+        esp_get_heap_fragmentation(), ampel.max_loop_duration, ampel.board, ampel.sensorId, ampel.version, dd, hh, mm,
+        ss, showHTMLIf(!ntp::connected_at_least_once));
+
+    Serial.print(F(" - Body2 size : "));
+    Serial.print(strlen(content));
+    web_config::http.sendContent(content);
 
     // Script
-    snprintf_P(content, sizeof(content), script_template
-#ifdef AMPEL_CSV
-        , csv_writer::filename, ampel.sensorId
-#endif
-        );
+    snprintf_P(content, sizeof(content), script_template, csv_writer::filename, config::ampel_name());
 
-    //    Serial.print(F(" - Script size : "));
-    //    Serial.println(strlen(content));
-    http.sendContent(content);
+    Serial.print(F(" - Script size : "));
+    Serial.println(strlen(content));
+    web_config::http.sendContent(content);
   }
 
-#ifdef AMPEL_CSV
   void handleWebServerCSV() {
-    if (!shouldBeAllowed()) {
-      return http.requestAuthentication(DIGEST_AUTH);
-    }
     if (FS_LIB.exists(csv_writer::filename)) {
       fs::File csv_file = FS_LIB.open(csv_writer::filename, "r");
       char csv_size[10];
       snprintf(csv_size, sizeof(csv_size), "%d", csv_file.size());
-      http.sendHeader("Content-Length", csv_size);
-      http.streamFile(csv_file, F("text/csv"));
+      web_config::http.sendHeader("Content-Length", csv_size);
+      web_config::http.streamFile(csv_file, F("text/csv"));
       csv_file.close();
     } else {
-      http.send(204, F("text/html"), F("No data available."));
+      web_config::http.send(204, F("text/html"), F("No data available."));
     }
   }
 
   void handleDeleteCSV() {
     if (!shouldBeAllowed()) {
-      return http.requestAuthentication(DIGEST_AUTH);
+      return web_config::http.requestAuthentication(DIGEST_AUTH);
     }
     Serial.print(F("Removing CSV file..."));
     FS_LIB.remove(csv_writer::filename);
     Serial.println(F(" Done!"));
-    http.sendHeader("Location", "/");
-    http.send(303);
+    web_config::http.sendHeader("Location", "/");
+    web_config::http.send(303);
   }
-#endif
 
   void handleWebServerCommand() {
     if (!shouldBeAllowed()) {
-      return http.requestAuthentication(DIGEST_AUTH);
+      return web_config::http.requestAuthentication(DIGEST_AUTH);
     }
-    http.sendHeader("Location", "/");
-    http.send(303);
-    sensor_console::execute(http.arg("send").c_str());
+    web_config::http.sendHeader("Location", "/");
+    web_config::http.send(303);
+    sensor_console::execute(web_config::http.arg("send").c_str());
   }
 
   void handlePageNotFound() {
-    http.send(404, F("text/plain"), F("404: Not found"));
+    web_config::http.send(404, F("text/plain"), F("404: Not found"));
   }
 }

ampel-firmware/web_server.h

@@ -2,7 +2,6 @@
 #define WEB_SERVER_H_
 
 namespace web_server {
-  void initialize();
-  void update();
+  void definePages();
 }
 #endif

ampel-firmware/wifi_util.cpp

 #include "wifi_util.h"
 
-#include "config.h"
+#include "web_config.h"
 #include "util.h"
 #include "ntp.h"
 #include "led_effects.h"
@@ -12,21 +12,42 @@
 #  include <WiFi.h>
 #endif
 
-namespace config {
-  // WiFi config. See 'config.h' if you want to modify those values.
-  const char *wifi_ssid = WIFI_SSID;
-  const char *wifi_password = WIFI_PASSWORD;
-
-#ifdef WIFI_TIMEOUT
-  const uint8_t wifi_timeout = WIFI_TIMEOUT; // [s] Will try to connect during wifi_timeout seconds before failing.
-#else
-  const uint8_t wifi_timeout = 60; // [s] Will try to connect during wifi_timeout seconds before failing.
-#endif
-}
-
 namespace wifi {
   char local_ip[16]; // "255.255.255.255\0"
 
+  bool connected() {
+    return WiFi.status() == WL_CONNECTED;
+  }
+
+  bool isAccessPoint() {
+    return WiFi.getMode() == WIFI_AP;
+  }
+
+  /*
+   * Connection attempt, called in blocking mode by setup(). This way, LED effects can be shown
+   * without needing callbacks, but only during wifi_timeout seconds.
+   * If connection fails, access point will be started indefinitely, and corresponding
+   * LED effects will be shown during 5 seconds.
+   *
+   * Afterwards, the non-blocking web_config::update() will be called inside loop, and the ampel
+   * can display CO2 levels.
+   */
+  void tryConnection() {
+    for (int i = 0; i <= config::wifi_timeout + 5; i++) {
+      web_config::update();
+      sensor_console::checkSerialInput(); // To allow reset or ssid ... during startup
+      if (isAccessPoint()) {
+        led_effects::alert(color::turquoise);
+      } else if (connected()) {
+        break;
+      } else {
+        led_effects::showRainbowWheel();
+      }
+      Serial.print(".");
+    }
+    Serial.println();
+  }
+
   void scanNetworks() {
     Serial.println();
     Serial.println(F("WiFi - Scanning..."));
@@ -49,49 +70,12 @@ namespace wifi {
     Serial.print(F("WiFi - Local IP : "));
     Serial.println(wifi::local_ip);
     Serial.print(F("WiFi - SSID : "));
-    Serial.println(WIFI_SSID);
+    Serial.println(config::selected_ssid());
   }
 
-  bool connected() {
-    return WiFi.status() == WL_CONNECTED;
-  }
-
-  // Initialize Wi-Fi
-  void connect(const char *hostname) {
-
+  void defineCommands() {
     sensor_console::defineCommand("wifi_scan", scanNetworks, F("(Scans available WiFi networks)"));
     sensor_console::defineCommand("local_ip", showLocalIp, F("(Displays local IP and current SSID)"));
-
-    //NOTE: WiFi Multi could allow multiple SSID and passwords.
-    WiFi.persistent(false); // Don't write user & password to Flash.
-    WiFi.mode(WIFI_STA); // Set ESP to be a WiFi-client only
-#if defined(ESP8266)
-    WiFi.hostname(hostname);
-#elif defined(ESP32)
-    WiFi.setHostname(hostname);
-#endif
-
-    Serial.print(F("WiFi - Connecting to "));
-    Serial.println(config::wifi_ssid);
-    WiFi.begin(config::wifi_ssid, config::wifi_password);
-
-    // Wait for connection, at most wifi_timeout seconds
-    for (int i = 0; i <= config::wifi_timeout && (WiFi.status() != WL_CONNECTED); i++) {
-      led_effects::showRainbowWheel();
-      Serial.print(".");
-    }
-    if (connected()) {
-      led_effects::showKITTWheel(color::green);
-      Serial.println();
-      Serial.print(F("WiFi - Connected! IP address: "));
-      IPAddress address = WiFi.localIP();
-      snprintf(local_ip, sizeof(local_ip), "%d.%d.%d.%d", address[0], address[1], address[2], address[3]);
-      Serial.println(local_ip);
-    } else {
-      //TODO: Allow sensor to work as an Access Point, in order to define SSID & password?
-      led_effects::showKITTWheel(color::red);
-      Serial.print(F("Connection to WiFi failed! Status : "));
-      Serial.println(WiFi.status());
-    }
+    //TODO: Add "update!" command? https://github.com/esp8266/Arduino/blob/master/libraries/ESP8266httpUpdate/examples/httpUpdate/httpUpdate.ino
   }
 }

ampel-firmware/wifi_util.h

@@ -2,9 +2,11 @@
 #define WIFI_UTIL_H_INCLUDED
 
 namespace wifi {
-  extern char local_ip[];
-  void connect(const char *hostname);
+  extern char local_ip[16];
+  void defineCommands();
   bool connected();
+  bool isAccessPoint();
+  void tryConnection();
 }
 
 #endif

platformio.ini

 ; PlatformIO Project Configuration File
 ;
-;   Build options: build flags, source filter, extra scripting
-;   Upload options: custom port, speed and extra flags
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
 ;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
 ;
 ; Please visit documentation for the other options and examples
-; http://docs.platformio.org/page/projectconf.html
+; https://docs.platformio.org/page/projectconf.html
 
 [platformio]
 src_dir = ampel-firmware
@@ -21,6 +22,9 @@ platform = espressif32
 board = ttgo-lora32-v1
 framework = arduino
 monitor_speed = 115200
-
 lib_deps =
     MCCI LoRaWAN LMIC library
+build_flags =
+    -D ARDUINO_LMIC_PROJECT_CONFIG_H_SUPPRESS
+    -D CFG_eu868=1
+    -D CFG_sx1276_radio=1