Commit dd513b62 authored by Eric Duminil's avatar Eric Duminil
Browse files

Updating doc

parent b18039e3
Pipeline #5726 passed with stage
in 2 minutes and 6 seconds
...@@ -81,10 +81,10 @@ In Arduino IDE *Serial Monitor* or PlatformIO *Monitor*, type `help` + <kbd>Ente ...@@ -81,10 +81,10 @@ In Arduino IDE *Serial Monitor* or PlatformIO *Monitor*, type `help` + <kbd>Ente
* `csv 60` (Sets CSV writing interval, in s). * `csv 60` (Sets CSV writing interval, in s).
* `format_filesystem` (Deletes the whole filesystem). * `format_filesystem` (Deletes the whole filesystem).
* `free` (Displays available heap space). * `free` (Displays available heap space).
* `led 0/1` (Turns LEDs on/off).
* `local_ip` (Displays local IP and current SSID). * `local_ip` (Displays local IP and current SSID).
* `lora 300` (Sets LoRaWAN sending interval, in s). * `lora 300` (Sets LoRaWAN sending interval, in s).
* `mqtt 60` (Sets MQTT sending interval, in s). * `mqtt 60` (Sets MQTT sending interval, in s).
* `night_mode` (Toggles night mode on/off).
* `reset` (Restarts the ESP). * `reset` (Restarts the ESP).
* `reset_scd` (Resets SCD30). * `reset_scd` (Resets SCD30).
* `send_local_ip` (Sends local IP and SSID via MQTT. Can be useful to find sensor). * `send_local_ip` (Sends local IP and SSID via MQTT. Can be useful to find sensor).
......
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
#include <Arduino.h> #include <Arduino.h>
/** Other scripts can use this namespace, in order to define commands, via callbacks. /** Other scripts can use this namespace, in order to define commands, via callbacks.
* Those callbacks can then be used to send commands to the sensor (reset, calibrate, night mode, ...) * Those callbacks can then be used to send commands to the sensor (reset, calibrate, led on/off, ...)
* The callbacks can either have no parameter, or one int32_t parameter. * The callbacks can either have no parameter, or one int32_t parameter.
*/ */
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment