Adding LoRaWAN to config.public.h

config.public.h

@@ -104,6 +104,26 @@
 #  define MQTT_PASSWORD ""
 #  define MQTT_SERVER_FINGERPRINT "EE BC 4B F8 57 E3 D3 E4 07 54 23 1E F0 C8 A1 56 E0 D3 1A 1C" // SHA1 for test.mosquitto.org
 
+/**
+ * LoRaWAN
+ */
+
+// Should data be sent over LoRaWAN?
+// It has been tested with "TTGO ESP32 SX1276 LoRa 868" and will only work with an ESP32 + LoRa modem
+#  define LORAWAN
+// How often should measurements be sent over LoRaWAN?
+#  define LORAWAN_SENDING_INTERVAL 300 // [s] Send pay
+// This EUI must be in little-endian format, so least-significant-byte first.
+// When copying an EUI from ttnctl output, this means to reverse the bytes.
+#  define LORAWAN_DEVICE_EUI      {0x88, 0x77, 0x66, 0x55, 0x44, 0x33, 0x22, 0x11}
+// This should also be in little endian format, see above.
+// For TheThingsNetwork issued EUIs the last bytes should be 0xD5, 0xB3, 0x70.
+#  define LORAWAN_APPLICATION_EUI {0x00, 0x00, 0x00, 0x00, 0x00, 0xD5, 0xB3, 0x70}
+// This key should be in big endian format (or, since it is not really a
+// number but a block of memory, endianness does not really apply). In
+// practice, a key taken from ttnctl can be copied as-is.
+#  define LORAWAN_APPLICATION_KEY {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
+
 /**
  * NTP
  */