Updated README

README.md

@@ -6,15 +6,14 @@ It measures the current CO<sub>2</sub> concentration (in ppm), and displays it o
 
 The room should be ventilated as soon as one LED turns red.
 
-## *Ampel* web-conf
+## Ampel web-conf
 
-*Ampel*-firmware + [IotWebConf](https://github.com/prampec/IotWebConf).
+Ampel-firmware + [IotWebConf](https://github.com/prampec/IotWebConf).
 
 This is beta software, and bugs are expected!
 
 * You probably need to update `config.h`. There's a new template in `config.public.h`.
 * Every parameter can be set in the web-configuration, so you don't have to modify `config.h` once it's been updated.
-* Add the IotWebConf library in Arduino IDE?
 * Flash
 * Start the *Ampel*
 * It should blink turquoise, to indicate *Access Point* mode
@@ -27,7 +26,7 @@ This is beta software, and bugs are expected!
 * The *Ampel* password will be required if a connection fails, and the *Access Point* starts again.
 * The *Ampel* password will be needed (with user 'admin') to connect to the web-page once the *Ampel* is connected to WiFi.
 * It might be necessary to reset the *Ampel* after changing important parameters.
-* You can rename the *Ampel*. This name will be used instead of ESPxxxxxx for CSV files and the mDNS address. You'll get a new CSV file after renaming, which can be convenient.
+* You can rename the *Ampel*. This name will be used instead of ESPxxxxxx for CSV files and the mDNS address. You'll get a new CSV file after renaming, which can be convenient, e.g. to indicate at which location the measurements were made.
 
 ## Features